Table of Contents
Advertisement
10. Using the Wi-Fi function
When sending images to AV device
You can send pictures and motion pictures to AV devices in your house (home AV
devices).
A Wireless access point
Preparations
When sending a picture to AV devices, set your device to DLNA waiting mode.
• Read the operating instructions of your device for details.
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] or [Send Images Stored in the Camera] >
[AV device]
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
5
When [Send Images While Recording] has been selected
Take pictures.
When [Send Images Stored in the Camera] has been selected
Select the picture.
• Sending may fail depending on the operational status of the AV device. Also, sending may
take a while.
B Home AV device
(P51)
(P274)
(P274)
(P290)
(P275)
279
Advertisement
Table of Contents
