Table of Contents
Advertisement
5. 4K Photo and Drive Settings
• We recommend using the shutter remote control (DMW-RSL1: optional) when you want to
keep the shutter button pressed fully while taking pictures in Burst Mode. Refer to
information about the shutter remote control.
• When the burst speed is set to [H], continuous shooting speed may be reduced while shooting
a large number of consecutive pictures.
• When the burst speed is set to [H] (when the Focus mode is [AFS] or [MF]), the exposure and
White Balance are fixed at the settings used for the first picture for the subsequent pictures as
well. When the burst speed is set to [H] (when the Focus mode is [AFF] or [AFC]), [M] or [L],
they are adjusted each time you take a picture.
• It may take time to save pictures taken in Burst Mode on the card. If you take pictures
continuously while saving, the maximum number of recordable pictures decreases. For
continuous shooting, use of a high speed memory card is recommended.
Not available in these cases:
• The Burst Mode is disabled in the following cases.
– [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]
(Scene Guide Mode)
– [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
– When recording motion pictures
– When recording using the flash
– When recording with the shutter speed set to [B] (Bulb)
– [Multi Exp.]
116
P315
for
Advertisement
Table of Contents
