Table of Contents
Advertisement
5. 4K Photo and Drive Settings
Selecting and saving pictures on the TV screen
∫
• Set [HDMI Mode (Play)] to [AUTO] or [4K].
When connecting to a TV that does not support 4K motion picture, select [AUTO].
• Set [VIERA Link] in [TV Connection] to [OFF].
• If you display 4K burst files on a TV connected to the camera, they will be displayed only on the
4K burst playback screen.
• Even if you insert the SD card to a 4K-compatible TV with an SD card slot, you cannot play
back 4K burst files recorded with [Aspect Ratio] set to an option other than [16:9].
(As of September 2016)
Notes on the 4K Photo function
To change the aspect ratio
∫
Selecting [Aspect Ratio] in the [Rec] menu allows you to change the aspect ratio for 4K
photos.
To record the subject with reduced blur
∫
You can reduce the blur of the subject by setting a faster shutter speed.
1
Set the mode dial to [
2
Set the shutter speed by rotating the rear dial or the front dial.
• Approximate shutter speed for outdoor recording in fine weather conditions:
1/1000 seconds or faster.
• If you increase the shutter speed, the ISO sensitivity becomes higher, which may
increase the noise on the screen.
Shutter sound for 4K photo recording
∫
• When using [
] ([4K Burst]) or [
sound settings in [Shutter Vol.] and [Shutter Tone].
• When recording with [
Volume].
• You can perform high speed burst recording quietly using the 4K Photo function in combination
with [Silent Mode].
Scenes not suitable for the 4K Photo function
∫
Recording in extremely bright locations or indoors
When subjects are recorded in an extremely bright place or under fluorescent/LED
lighting, the colour tone or brightness of the image may change, or horizontal stripes may
appear on the screen.
Lowering the shutter speed may reduce the effect of the horizontal stripes.
Subjects that are moving fast in the horizontal direction
If you record a subject moving fast in the horizontal direction, the subject in the recorded
pictures may appear distorted.
].
] ([4K Pre-Burst]), you can change the electronic shutter
] ([4K Burst(S/S)]), you can set the start/stop tone volume in [Beep
124
(P230)
Advertisement
Table of Contents
