HP ProCurve 2510 Management And Configuration Manual page 156

Time Protocols
SNTP: Viewing, Selecting, and Configuring
SNTP Feature
view the SNTP time synchronization configuration
select SNTP as the time synchronization method
disable time synchronization
enable the SNTP mode (Broadcast, Unicast, or Disabled)
broadcast
unicast
none/disabled
configure an SNTP server address (for Unicast mode only) none
change the SNTP server version (for Unicast mode only)
change the SNTP poll interval
9-4
Disabling Time Synchronization
You can use either of the following methods to disable time synchronization
without changing the Timep or SNTP configuration:
In the System Information screen of the Menu interface, set the Time
■
Synch Method parameter to None, then press [Enter], then [S] (for Save).
In the Global config level of the CLI, execute no timesync.
■
SNTP: Viewing, Selecting, and
Configuring
Default Menu
n/a page 9-5
timep page 9-6
timep page 9-6
disabled
n/a page 9-6
n/a page 9-6
n/a page 9-6
page 9-6
3 page 9-7
720 seconds page 9-7
CLI Web
page 9-8 —
page 9-9 ff. —
page 9-12 —
—
page 9-9 —
page 9-10 —
page 9-13 —
page 9-10 ff. —
page 9-12 —
page 9-12 —