Hospitality Mode; Intercept Routing To A Mailbox; Intercom Paging - Panasonic KX-NS700 Feature Manual

3.2.1 System Features

3.2.1.21 Hospitality Mode

Description
Allows a subscriber to access certain subscriber services in a dedicated, 'hospitality' mode. Subscribers in
hospitality mode can listen to messages, change the password, change personal greetings, and change the
owner's name, if enabled to do so through system programming. Also, it is possible to set whether the
password, personal greeting and owner name settings are deleted upon check-out.
PC Programming Manual References
21.1 UM Configuration—[2] Class of Service—Hospitality Mode
Feature Manual References
2.23 Hospitality Features

3.2.1.22 Intercept Routing to a Mailbox

Description
If the Intercept Routing destination is set to the floating extension number of the UM group, and the "Intercept
to Mailbox for Call to Extension" setting is enabled through system programming, intercepted trunk calls will
be redirected to the extension's mailbox. Therefore the caller can leave a message in the mailbox of the
extension without knowing the mailbox number.
PC Programming Manual References
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—
Extension
Feature Manual References
2.1.1.6 Intercept Routing

3.2.1.23 Intercom Paging

Description
Allows callers to page subscribers when the subscribers have set Intercom Paging for Call Transfer or when
the subscribers have set Intercom Paging for Incomplete Call Handling. The caller is briefly placed on hold
while the system announces the page and until the subscriber answers the page. The subscriber can answer
the page from any extension using the paging answer feature number. If Caller ID information is received and
the caller's name has been recorded for the Caller Name Announcement feature, the name will be announced
at the end of the page.
To utilise this feature, the following settings are necessary:
1.
Assign an Intercom Paging Group to the desired Class of Service.
® 21.1 UM Configuration—[2] Class of Service—Call Transfer—
2.
Set "No Answer Time for Intercom Paging" to the desired setting.
® 24.4 UM Configuration—[5-4] System Parameters—Parameters—
Paging (1-30 s)
344 Feature Manual
Intercept to Mailbox for Call to
Intercom Paging Group
No Answer Time for Intercom