Ariens 991314 Operator's Manual page 35

5. Remove transaxle drive belt from drive
system in the following order:
a. From right transaxle sheave.
b. From left transaxle sheave.
c. From clutch sheave.
Install Transaxle Drive Belt
See Figure 47.
1. Install transaxle drive belt to drive system
in the following order:
a. Around clutch sheave.
b. Around left transaxle sheave.
c. Around right transaxle sheave.
2. Align belt with idler pulley.
3. Reinstall idler spring hook onto anchor
bolt. Make sure belt has tension and is
aligned in all pulleys.
2
1. Spring
2. Idler Pulley
Figure 47
1
IMPORTANT: Make sure belt has tension and
is aligned in all pulleys. See Figure 48.
3
1
1. Engine Sheave
2. Idler Pulley
3. Left Transaxle
4. Right Transaxle
3. Reinstall clutch stop bracket and secure
with original hardware. See Figure 49.
4. Reinstall PTO belt. See Install PTO Belt
on page 29.
EN - 31
2
Figure 48
Figure 49
4