Benassi BL304 Operating And Safety Instructions Manual page 39

• For the normal maintenance (oil, filter, spark plug) check the booklet for the engine included.
• The chain for the final transmission is lubricated with normal grease.
Every year you should introduce some grease through the hole "Q" (Pict. 19) in the main body
• Keep the machine and the tillers clean and check that all the screws and nuts are well tied, especially the screws of the
tiller (always wear protection gloves working on the tiller).
• In case of breaking or wear you can replace the belt after taking off the side protection cover fixed to the frame near
the engine shaft by two screws (Pict. 12-13-14).
• In order to remove the belt of the reverse gear, it is necessary to remove the small cover ("K" Pict. 14) by unscrewing
its screw. Remove the belt from the pulleys, install the new belt end adjust it following the instructions mentioned in the
chapter USE AND ADJUSTMENT by checking the distance between both sides of the belt, then replace the cover.
• The pin fixing the big pulley has also a safety purpose: in case heavy obstacle it will break avoiding damages to other
parts of the machine.
• The replacement of the pin is very easy: you have to insert the new pin in the hole using a hammer.
• For any technical repair especially during the guarantee period, it is recommendable to apply to the specialized
workshops of our dealers.
CAUTION
It is advised not to keep the motor running when the machine is not being used for its specific
purpose
Our machines and accessories are guaranteed for 2 years excluding electric and rubber parts.
All the defective parts will be replaced free of charge excluding cost of labour and transport freight, which would be at
customer's charge.
For any problem regarding the engine or any other part not of our production, please refer to the guarantee conditions
stated by the manufacturer and apply to their assistance centres.
For any kind of problem or repair please apply to the dealer where you bought the machine.
MAINTENANCE
WARRANTY
BL300 BL350 BL304 BL354
39