Toyota PRIUS 2014 Manual page 292

2-2. Instrument cluster
When driving on snowy roads or in other bright environments
■
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding "" on the brightness control
button.
Pressing "" on the brightness control button or turning the "POWER" switch
off will cause the brightness level to revert to the original level.
Display speed setting function
■
The speedometer can be set to display only when a desired vehicle speed is
reached.
STEP 1
Press and hold the "HUD" main switch while the vehicle is stopped
and while the head-up display is showing only the speedometer.
The speedometer will begin to flash.
STEP 2
Set the desired display speed on the speedometer by pressing ""
and "" on the display position adjustment button.
Press "" to raise the speed and "" to lower. The speed will change
by 1 mph (1.6 km/h) each time the button is pressed, and continu-
ously by 10 mph (16 km/h) when the button is pressed and held.
STEP 3
Press and hold the "HUD" main switch to finish setting.
Head-up display
■
The head-up display may seem dark and hard to see when viewed through
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
When the 12-volt battery is disconnected
■
The head-up display settings will be reset.
292
PRIUS PHV_OM_OM47856U_(U)