Toyota PRIUS 2014 Manual page 251

Operation of the air conditioning system in Eco drive mode
■
Eco drive mode controls the heating/cooling operations and fan speed of the
air conditioning system to enhance fuel efficiency. (P. 249) To improve air
conditioning performance, adjust the fan speed or turn off Eco drive mode.
For the shift positions
■
●
When the "POWER" switch is off, the shift position cannot be changed.
●
When the "POWER" switch is in ON mode (the hybrid system is not oper-
ating), the shift position can only be changed to N. The shift position will
be changed to N even if the shift lever is shifted to D or R and held in that
position.
However, immediately after turning the "POWER" switch to ON mode,
the shift position may not change to N.
●
When the "READY" indicator is on, the shift position can be changed
from P to D, N or R.
●
When the "READY" indicator is flashing, the shift position cannot be
changed from P to other position even if the shift lever is operated. Wait
until the "READY" indicator changes from a flashing to a solid light, and
then operate the shift lever again.
●
The shift position can only be changed to B directly from D.
In addition, if an attempt is made to change the shift position by moving the
shift lever or by pressing the P position switch in any of the following situa-
tions, the buzzer will sound and the shifting operation will be disabled or the
shift position will automatically change to N. When this happens, select an
appropriate shift position.
●
Situations where the shifting operation will be disabled:
• When an attempt is made to change the shift position from P to other
position by moving the shift lever without depressing the brake pedal.
• When an attempt is made to change the shift position from P or N to B
by moving the shift lever.
• When an attempt is made to change the shift position from P to another
position by moving the shift lever while the charging cable is connected
to the vehicle.
PRIUS PHV_OM_OM47856U_(U)
2-1. Driving procedures
251
2