Power (Ignition) Switch - Toyota PRIUS 2014 Manual

2-1. Driving procedures

Power (ignition) switch

Performing the following operations when carrying the electronic
key on your person starts the hybrid system or changes "POWER"
switch modes.
Starting the hybrid system
■
STEP 1
Check that the charging cable is disconnected. (
STEP 2
Check that the parking brake is set.
STEP 3
Firmly depress the brake pedal.
Check that the "POWER" switch indicator turns green. If the indi-
cator does not turn green, the hybrid system cannot be started.
When the shift position is N, the hybrid system cannot start. Shift
the shift position to P when starting the hybrid system. (P. 250)
STEP 4
240
PRIUS PHV_OM_OM47856U_(U)

Press the "POWER" switch.
The hybrid system can be
started from any "POWER"
switch mode.
Continue depressing the brake
pedal until the hybrid system is
completely started.
P. 95)