Toyota Prius 2011 Manual page 550

Hide thumbs Also See for Prius 2011:
Table of Contents

Advertisement

5-2. Steps to take in an emergency
Changing "POWER" switch modes and starting the hybrid sys-
tem
STEP
1
STEP
2
To change "POWER" switch modes: Within 10 seconds of the
buzzer sounding, release the brake pedal and press the
"POWER" switch. Modes can be changed each time the
switch is pressed. (P. 164)
To start the hybrid system: Press the "POWER" switch within
10 seconds after the buzzer sounds, keeping the brake pedal
depressed.
In the event that the "POWER" switch still cannot be operated, con-
tact your Toyota dealer.
Stopping the hybrid system
Push the "P" position switch and press the "POWER" switch as you normally
do when stopping the hybrid system.
Replacing the key battery
As this procedure is the temporary measure, it is recommended that the
electronic key battery be replaced immediately when the battery depletes.
(P. 469)
550
Apply the brakes and touch the
Toyota emblem side of the
electronic key to the "POWER"
switch.
An alarm will sound to indicate
that the start function cannot
detect the electronic key that is
touched to the "POWER" switch if
ITO52P165
any of the doors is opened and
closed while the key is touched to
the switch.

Advertisement

Table of Contents
loading

Table of Contents