2-4. Using other driving systems
The rear view monitor system can be operated when
■
The shift position is in "R".
Switching the screen
■
Display mode
■
●
To select a display language (English, French, or Spanish).
STEP
1
Press and hold the
The monitor should turn on and the indicator should turn green.
STEP
2
Press the
STEP
3
Each time the
will change. The warning message should flash once after about 5
seconds, indicating that the change has been completed.
●
To permanently disable the monitor.
Press and hold the
The monitor will turn off and on after 6 seconds. Continue holding the but-
ton down until the display turns back off.
The indicator should flash orange.
The monitor will not automatically turn on again after the "POWER" switch
is turned off and on.
238
On
Green indicator comes on.
The monitor will automatically turn on
again after the "POWER" switch is
turned off and on.
Off
Orange indicator comes on.
button for 6 seconds.
button.
button is pressed and released, the language
button for 12 to 15 seconds.