Toyota Prius 2011 Manual page 207

Hide thumbs Also See for Prius 2011:

Table of Contents

Returning to the previous screen

System check display

After switching the "POWER" switch to ON mode, "PRIUS" is displayed

while system operation is checked. When the system check is complete, the

normal screen will return.

Vacuum fluorescent display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of vacuum fluorescent displays, and there is no problem to

continue using the display.

Eco Driving Indicator Light

This indicator will not turn on if the following conditions are met while driving:

The shift position is anything other than "D".

The driving mode is set to power mode or EV-Drive Mode.

The vehicle speed is approximately 80 mph (130 km/h) or higher.

5-minute interval/1-minute interval fuel consumption display

If the "POWER" switch is turned OFF, average fuel consumption and regen-

erated energy data will be reset.

Odometer/trip meter/distance to empty

The odometer/trip meter/distance to empty will not be displayed while the

fuel consumption history is being displayed.

2-2. Instrument cluster

Select "EXIT" on the screen by

pressing the "DISP" switch, and

press and hold the "DISP"

The screen will revert to the

"SETTINGS" screen.