Natural Vent - Model Gs50; Combustion Air - Napoleon Havelock Installation And Operation Manual

installation
EN

3.2.5 natural vent - model GS50

Attach one lead from the spill switch (white wire) to terminal #3 located on the gas valve and the other (black) on/
off switch lead to valve terminal #1.
Attach the B-Vent label, as illustrated, in the control area of the appliance.
3
2
1

3.2.6 combustion air

WARNING
!
• Any appliance neds air for safe operation and must be installed in such a way that adequate combustion air is
available. This appliance is designed to function using either outisde or inside (room) air.
If using outside air, connections can be made through a hole in the fl oor to line up with the hole in the pedestal
base. Use a fresh air kit available through your local authorized dealer / distributor. Secure the 4" (102mm)diameter
aluminum liner to the hole in the base of the pedestal. Avoid cutting away fl oor joist, electrical wiring or plumbing.
Seal around the outside pipe with insulation to prevent drafts.
26
W415-1427 / C / 06.05.19
ATTACH THIS LABEL IN THE CONTROL AREA OF THE APPLIANCE.
THIS APPLIANCE HAS BEEN CONVERTED TO A NATURAL VENT
ATTACHEZ CET ÉTIQUETTE DANS LA RÉGION DE CONTRÔLE DU FOYER.
CET APPAREIL A ÉTÉ CONVERTI À UN MODÈLE À TIRAGE
NATUREL.
MODEL.
W385-0160 / B