Using The Laser Guide - Delta ShopMaster S26-272L Instruction Manual

USING THE LASER GUIDE

When the laser guide switch is turned on it projects a red
line onto the work surface enabling you to see your cut
before you make it. Follow the steps below to ensure a
true and straight cut (Refer to Figure 14):
1. Make sure the saw is unplugged.
2. Draw a line on the workpiece where you plan to cut.
3. Flip the laser switch (A) on the "ON" position.
4. The red line (B) indicates the path of the blade.
5. Align the laser line and the mark with the blade at the
uppermost position.
6. Once both lines are in alignment, do not move the
workpiece.
7. Plug the saw into the power source.
8. Make several practice cuts on different styles and
thickness of material.
TO REMOVE YOUR MARK:
Position the laser line near the left edge of your mark on
the work surface in order to cut the mark.
TO CUT ON YOUR MARK:
Position the laser line near or over your mark on the work
surface in order to cut the mark.
TO CUT WITHOUT REMOVING YOUR MARK:
Position the laser line near the right edge of your mark
on the work surface in order to leave the mark. After you
have become familiar with using the laser guide, you will
be able to remove, cut, or leave your mark on the work
surface. Practice will teach you the correct position for
aligning the laser line with your mark.
• Avoid direct eye exposure to laser beam or reflection.
Intense or prolonged exposure to laser radiation
could permanently damage your eyes. Do not project
or reflect the laser into anyone's eyes, including your
own.
• Caution -- use of controls or adjustments or
performance of procedures other than those
specified herein may results in hazardous radiation
exposure.
• Do not disassemble or modify the laser. There are no
user serviceable parts inside. Serious eye injury could
result.
• Use or modification of the laser guide for anything
other than its designed purpose may result in
hazardous radiation exposure.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call
1-800-223-7278 for a free replacement.
PREPARING YOUR SAW FOR USE
APPLICATIONS
A
13
B
14A000001211401CT
EXAMPLE SERIAL NUMBER, FOR
REFERENCE ONLY
FIGURE 14