Network; Others - Panasonic DMR-BW880 Operating Instructions Manual

Changing the unit's settings
How to access each item.

Others

Network or Others

Network

∫ Network Easy Settings
Press [OK] to start Network Easy Settings. (
∫ Network Settings
IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
≥ "Connection Speed Setting" is enabled only when
"Connection Speed Auto-configure" is turned "Off".
Proxy Server Settings
Check and set the connection to the Proxy
server.
≥Press [OK] to show the respective setting.
Internet Content Settings
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (
Automatic Volume Control
Volume that is different depending on the
contents is adjusted automatically to the
standard volume while using the VIERA
CAST.
≥Depending on contents, this function will not
work.
≥Select "Off" when the audio is warped.
Home Network ( DLNA ) Settings
You can set the DLNA function (
It is also possible to change the name of this unit
on the network.
84
VQT2J65
Setup
75)
67)
Others
∫ Standby Settings
Power Save in Standby
On
On Timer Power Save in Standby mode is
13)
Off
≥This function cannot be enabled when the
DLNA function is enabled in "Home Network
( DLNA ) Settings". (
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
After the unit has finished operating, the unit will
be turned to standby mode once the set time has
passed.
≥When "REWIND LIVE TV" is set to "On"(
"Off" cannot be selected.
Automatic Standby after OTR
If "On" is selected, this unit is turned to standby
mode when it is not operated for approximately
5 minutes after completing Automatic Stop
recording or One Touch Recording (
Automatic Standby after Copy
If "On" is selected, this unit is turned to standby
mode when it is not operated for approximately
5 minutes after completing copy (
It will go into the Power Save in
Standby mode.
activated when the set time comes.
≥If the clock has not been set,
Power Save in Standby mode is
activated at all hours.
It is possible to start quickly from the
standby mode. (Quick Start mode)
left)
79),
21).
44).