Panasonic DMR-BW880 Operating Instructions Manual page 76

Changing the unit's settings
How to access each item.
Others Setup
∫ Channel List
You can edit the Channel List.
All DVB Channels
HD 1
2
HD
3
HD 4
5
HD 6
HD 7
Select
Hide
RETURN
Tune Swap
≥To skip unwanted channels
1 Select the channel.
2 Press [OK].
≥The check mark is removed.
≥"Yellow": Clear the all skip setting.
≥To change the channel number assignment
1 Select the channel, then press the "Green" button.
2 Enter the channel number you want to reassign
with the number buttons.
e.g., 5:
15:
115:
3 Press [OK].
≥If another channel is already assigned to the
channel number you wish to use, the two
channels will be switched.
≥To set the channel manually
Press the "Red" button.
"DVB Manual Tuning" screen appears. (
∫ Auto Setup
You can restart Auto Setup.
Select "Yes", then press [OK].
≥If you perform "Channel Sorting by Region"
( below), you can sort the channel list best suited
to your region after Auto tuning is finished.
∫ Channel Sorting by Region
If you want to sort the channel list best suited to your
region, follow the on-screen instructions to select the
region you live in.
76
VQT2J65
Tuning
Channel
names
Reveal all
[0] [0] [5]
[0] [1] [5]
[1] [1] [5]
right)
∫ Manual Tuning
You can set each channel manually when the Auto
Setup could not complete successfully.
DVB Manual Tuning
Frequency
[CH ]
0
Signal Quality
0
Signal Strength
No. Channel Name
Free TV: 0 Pay TV: 0 Radio: 0
Select frequency
Start scan
RETURN
1 Select the frequency with [3, 4].
≥Select the frequency by checking the signal
strength and signal quality displays.
2 Press [OK] to start scan.
The set channel is displayed in the table.
∫ Update Channel List
You can update the channels to the latest one.
≥This takes about 3 minutes.
DVB Update Channel List
Progress CH 21
This will take about 3 minutes.
Ch Channel Name
Free TV: 0 Pay TV: 0
Actual number of channels may differ due to channnel duplication
RETURN
"Finished" is displayed when the search is finished.
Press [BACK/RETURN
≥ After performing "Update Channel List" or "Manual Tuning"
if the channel number has already been assigned, channel
number for them will be assigned from 800ch onward.
MHz
10
10
Type New
Data: 0
68
Type Quality
Radio: 0 Data: 0
Searching
].