Panasonic DMR-BW880 Operating Instructions Manual page 85

∫ Remote Control
Change the remote control code on the main unit and
the remote control if you place other Panasonic
products close together.
≥Use "BD 1", the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number
button ([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote
controls with "IR6" printed at the bottom when the
remote control code of this unit is set to "BD 4",
"BD 5" or "BD 6".
BLU-RAY DISC RECORDER
BLU-RAY DISC RECORDER
IR6
IR6
IR6
∫ Clock
If the time is not set correctly, use the settings
listed in the method below.
Clock
Automatic
On
Time
0 00 10
Please set the clock.
OK: access RETURN: leave
OK
RETURN
Automatic
This unit usually obtains time and date
information from digital broadcasts.
But, if the time is not set correctly, set it to "Off"
and perform "Manual Setting".
Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
Time Zone
Adjust the time data automatically or from
GMT -6 to + 6.
Time Zone
Automatic
Date
1 1 2010
85
VQT2J65