Panasonic DMR-BW880 Operating Instructions Manual page 12

Auto Setup
5
Press [BACK/RETURN
6
Enter the new PIN.
PIN Entry
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to "0000" by pressing "RETURN" when there is no
number input.
-
RETURN
≥Make a note of PIN in case you forget it.
≥The default PIN is "0000".
1 Select the number, then press [1].
2 Repeat step 1.
3 Press [OK] twice.
7
Set "Power Save" to "On", "On Timer"
or "Off", then press [OK].
Power Save in Standby
From
0
Standby power consumption is reduced by disabling
Quick Start function and AV2 loop-through in standby.
Home Network (DLNA) function is not available in both standby
and power on modes
OK
RETURN
On Power consumption will be reduced
to a minimum level in standby
mode.
On Set period of power save and then
Timer press [OK].
≥Power Save in Standby mode is
activated at the set time period.
Off It is possible to start quickly from
the standby mode. (Quick Start
mode)
≥If you use Home Network (DLNA)
Function (
function is not available with other
settings.
≥Video from AV2 input cannot be viewed with
this unit in standby mode when Power Save in
Standby mode is activated.
12
VQT2J65
] to confirm.
- - -
-
Number 0 9
Power Save
On
To
6
66), select "Off". This
When the following screen appears, Easy setting
is complete.
Easy Setting
Easy Setting has been completed.
To use Internet functions, network connection needs
to be made first. Proceed Network Easy Settings ?
Select "Yes" to start. Select "No" to exit the Setup.
Yes
OK
≥Select "Yes" to proceed to "Network Easy
Settings". ( 13)
≥Select "No" to finish the Setup.
To stop partway
Press [BACK/RETURN
To restart set up
1 While stopped
Press [FUNCTION MENU].
2 Select "Others", then press [OK].
3 Select "Setup", then press [OK].
4 Select "Auto Setup" in "Tuning", then press [OK].
To display the Owner ID information on TV
Press and hold [∫] on the main unit for more than
5 seconds.
The PIN is not displayed.
After 30 seconds this menu automatically disappears.
You cannot change the Owner ID on this screen.
You can perform this operation after step 6.
To confirm the Channel List (
List)
To check the signal condition (
Condition)
To change PIN ( 86, PIN Entry)
To sort the Channel List by region (
Channel Sorting by Region)
No
].
76, Channel
77, Signal
76,