Operation; Recording, Timer Recording And Copying - Panasonic DMR-BW880 Operating Instructions Manual

Troubleshooting guide

Operation

The remote control doesn't work.
The remote control and main unit are using
different codes. Change the code on the remote
control.
Software (firmware) is updating when "UPD / "
is displaying on the unit's display. Wait until the
update is completed. (
The HOLD function is activated. (
The unit is on but cannot be operated.
Drive has not been selected properly.
Startup is slow.
Startup takes time in the following situations:
–A disc is inserted.
–The clock is not set.
–Immediately after a power failure or the AC mains
lead is connected.
–When the unit is connected with an HDMI cable.
–When the BD-J (
–When the "Power Save in Standby" is activated.
( 84)
94
VQT2J65
1 Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
2 Press and hold [OK] for more
than 5 seconds.
87)
88)
116) application is executing.
Recording, timer recording and
copying
Cannot record.
Cannot copy.
Some broadcasts are copyright protected.
You can not record to the disc by pressing the
[¥ REC] or timer recording.
The disc is protected with DVD Management or
Blu-ray Disc Management. (
Some programmes on digital broadcast channels
are copy-restricted and the number of times you
can copy in DR, HG, HX, HE, HL, HM mode is
assigned by the broadcaster
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Since it will
copy to HDD temporarily, copying is not possible if
there is insufficient available capacity on the HDD.
Delete unnecessary titles on the HDD (
72)
You cannot record and copy on finalised discs.
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] Recording or
editing may not be possible on these discs after
ejecting and loading the disc or turning the unit on/
off for approximately 30 times after being recorded
to.
Discs recorded on equipment other than this unit
may not be able to be recorded to.
This unit cannot record/copy NTSC signals to
discs that already have PAL signal recordings.
Play of discs recorded with both PAL and NTSC on
another unit is not guaranteed.
Cannot record from external equipment.
Check that the connection and input channel is
correct. ( 62)
Cannot record 2 programmes
simultaneously.
There are conditions that 2 programmes
simultaneous recording is possible. (
Timer recording does not work properly.
Refer to "Notes on timer recording" (
A part or whole of a recorded title has been
lost.
If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the title may be lost or
the HDD/disc may become unusable.
We cannot offer any guarantee regarding lost
programmes or discs. (
72)
29, 39,
22)
30)
72, 79)