Area Code Settings; Set Home Area Code - VTech IS8128 User Manual

Area code settings

Set home area code

If you dial your local calls using only
seven digits (area code not required),
you can program your home area code
so that when you receive a call within
your local area, the telephone number
is automatically stored without the area
code in the caller ID log.
Using a cordless handset or telephone
base:
1. Press MENU/SELECT
phone is not in use.
2. Press q CID or p
Settings, and
MENU/SELECT to select.
3. Press q CID or p
Home area code, and then press
MENU/SELECT to select.
4. Use the dialing keys to enter a three-
digit home area code.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to delete a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to delete all
digits.
5. Press MENU/SELECT to save.
• The screen returns to the previous
menu.
• You hear a confirmation tone.
• If, in the future, your telephone
when the
to choose
then press
to choose
105
NOTE
service provider requires you to dial
the area code when making a local
call, -OR-, if you move to a location
that requires it, delete the home area
code you have already programmed,
following the steps above. After you
have deleted the home area code, _
_ _ will appear on the display.