User Button Functionality Added: F - Panasonic HC-X2000 Owner's Manual

USER Button Functionality Added
The following functionality has been added for the USER buttons.
* Available for setting when using
Item (USER button icon display)
[ONE PUSH A.IRIS] ([ONE PUSH A.IRIS])
[O.I.S. MODE] ([O.I.S. MODE])
[REC SW] ([REC SW])
[AUDIO CH1 LEVEL] ([AUDIO CH1 LEVEL])
[AUDIO CH2 LEVEL] ([AUDIO CH2 LEVEL])
[LCD/VF OUTPUT]* ([LCD/VF OUTPUT])
[AUDIO OUT] ([AUDIO OUT])
One push auto iris function
In the manual iris mode, the USER button function [ONE PUSH A.IRIS] enables use of the following functionality.
One push auto iris function
Push auto iris function
@
NOTE
0 [STD] is displayed on the screen during auto iris mode.
0 The one push auto iris function cannot be used in the following cases:
j In auto mode
j In auto iris mode
j In IR recording mode
Firmware Ver. 1.4 — USER Button Functionality Added
.
X2000
Assigns the one push auto iris function.
Switches the operation mode of the optical image stabilizer function. Each time you either press the USER
button or touch the USER button icon, the operation mode switches in the order [NORMAL], [PAN/TILT],
[STABLE]
Assigns the same functions as the REC buttons.
Switches the recording level adjustment method for audio channel 1 between automatic and manual.
Switches the recording level adjustment method for audio channel 2 between automatic and manual.
Switches the display method of the LCD monitor/viewfinder when [VIDEO OUT/LCD/VF] menu

OUT SEL] [SDI + HDMI OUTPUT]
Switches the audio channel and the format to output from the headphone terminal and the built-in speaker.
Each time you either press the USER button or touch the USER button icon, the audio channel and the
format switch in the order [CH1], [CH2], [CH1/2 STEREO], [CH1/2 MIX].
By either pressing the USER button or touching the USER button icon, the mode switches to the auto iris
mode and the iris (lens stop) is automatically adjusted.
≥ The mode returns to the manual iris mode when the automatic adjustments finish.
While the USER button is being pressed, or the USER button icon is being touched and held, the mode
temporarily switches to auto iris mode.
≥ When [AREA MODE] is set to [IRIS] or [FOCUS/IRIS] and the area function is used, the iris is
automatically adjusted to suit the subject that was touched.
≥ This is canceled when the USER button or USER button icon is released and the adjusted iris value is
maintained.
Description

[ON].
- F 11 -

[VIDEO