User Button; Setting The User Button; Using The User Button - Panasonic HC-X1000 Basic Operating Instructions Manual

Recording

USER button

Each of the USER button can register one function from the 24 available functions.
≥ There are six USER buttons (USER1 to USER6) on the main body and four USER button icons
(USER7 to USER10) displayed on the LCD monitor.

Setting the USER button

1
Select the menu.
MENU
: [SW SETUP] # [USER BUTTON SETUP]
2
Touch the USER button you wish to set.
≥ The USER button number and currently set function name
are displayed. (For example, a display of 1. [DRS] means that
[DRS] has been assigned to USER1 button.)
3
Touch the item to register.
≥ For the functions of the USER button that can be registered,
refer to page 32.
≥ Touch [INH] (Inhibit) if not registering.
≥ Next (Previous) page can be displayed by touching
≥ To continuously set other USER buttons, repeat Steps 2-3.
4
Touch [EXIT] to complete the setting.

Using the USER button

To use the set USER button, press USER1 to USER6 button or touch the USER7 to USER10 button
icon displayed when you touch the LCD monitor.
(When you use the USER1 to USER5 button) (When you use the USER6 button)
USER
FOCUS
ASSIST
1
5
2
3
4
/ .
6
REC CHECK
31
SQT0478