Panasonic HC-X2000 Owner's Manual page 23

42
Status indicator (l 37)
Illuminates when power is on.
43
Battery release lever (l 28)
Used when removing the battery from the main unit.
44
Battery mounting section (l 28)
Attaches a battery.
45
Viewfinder (l 54)
46
REC button (on the grip) (l 104)
Starts or stops the recording.
It is possible to directly record from the thumbnail mode.
47
<HDMI> terminal (l 169)
A terminal to output video signal by connecting a monitor, etc.
53
Built-in microphone (l 125)
This is the built-in stereo microphone <L>/<R>.
54
Accessory shoe (on the main unit)
Attach a video light, etc.
55
Zoom lever (on the grip) (l 118, 153)
Adjusts the zoom of an image.
<T>: Zooms in the image.
<W>: Zooms out the image.
≥ Adjust the volume when playing back clips.
56
Handle unit mounting section (l 33)
57
<USER5> button (l 50, 105)
Used as a USER button (USER5).
≥ [REC CHECK] is set at the time of purchase.
Automatically plays back the last approximately 3 seconds of the
previously shot clip.
Chapter 2 Description of Parts — Main unit
42 43 44 45
52
53 54
X2000
46
51
47
48
49
50
48
Headphones terminal
Connects audio monitoring headphones.
49
Charging lamp (l 29)
Illuminates when the battery is charging.
50
<DC IN 12V> terminal (l 29)
Connects the supplied AC adaptor and supplies an external power.
51
(For the )
X2000
<SDI OUT> terminal (l 169)
A terminal to output SDI signal by connecting a monitor, etc.
52
LCD monitor (l 53)
55 56 57
- 23 -