Table of Contents
Advertisement
Recording
USER button
Each of the USER button can register one function from the 28 available functions.
≥ There are 5 USER buttons (USER1 to 5) on the main body and 4 USER button icons (USER6 to
USER9) displayed on the LCD monitor.
Setting the USER button
1
Select the menu.
MENU
: [USER SW] # [USER1] to [USER9]
≥ It is not possible to register functions to [USER6] to [USER9] in Playback Mode.
2
Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 63.
≥ Touch [INHIBIT] if not registering.
≥ Next (Previous) page can be displayed by touching
3
Touch [EXIT] to complete the setting.
≥ The tables below show the default settings.
USER1 button
USER2 button
USER3 button
USER4 button
USER5 button
≥ Performing [YES] in [INITIAL SET] restores these default settings.
Using the USER button
To use the function assigned to a USER button or USER button icon, press the applicable USER
button (one of the USER buttons 1 to 5), or touch the applicable USER button icon (one of the
USER button icons 6 to 9) while operation icons are displayed.
(When you use the USER1 to USER4 button)
[LCD/EVF OUTPUT]
[BACKLIGHT]
[O.I.S.]
[FOCUS ASSIST 1]
[REC CHECK]
FOCUS
LCD/EVF
ASSIST
4
B.LIGHT
O.I.S.
/
.
USER6 button
USER7 button
USER8 button
USER9 button
(When you use the USER5 button)
1
2
3
- 62 -
[FRZ FRAME]
[EVF/LCD DETAIL]
[ATW LOCK]
[MENU]
(l
135)
5
REC CHECK
Advertisement
Table of Contents
