Communication Ports - Siemens RUGGEDCOM RSG2100 Installation Manual

RUGGEDCOM RSG2100
Installation Guide

Communication Ports

The RUGGEDCOM RSG2100 can be equipped with various types of communication ports to enhance its abilities
and performance.
1
2
Figure 15: Port Assignment
Each type of module has a specific location in the RUGGEDCOM RSG2100 chassis:
• Slots 1 to 4 support any combination of fixed fiber or copper Ethernet connectors up to 100 Mbps
• Slot 5 supports a pair of fixed 1 Gbps ports
• Slot 6 supports a single expansion port of any type
• Slots 7 to 10 support any combination of two-port fiber or copper Ethernet modules
The exact configuration of the device can be determined by reading the factory data file through the ROS user
interface. For more information about how to read the factory data file, refer to the ROS User Guide for the
RUGGEDCOM RSG2100.
Each communication port is equipped with an LED that indicates the link/activity state of the port.
Figure 16: Port LEDs
1. Port LED
The following sections describe the available communication ports:
• Section 3.1, "Copper Ethernet Ports"
• Section 3.2, "Fiber Optic Ethernet Ports"
• Section 3.3, "SFP Optic Ethernet Ports"
• Section 3.4, "GBIC Optic Ethernet Ports"
3 5
4 6
1
7 9
8 10
LED State
Green (Solid)
Green (Blinking)
Off
Chapter 3
Communication Ports
Description
Link established
Link activity
No link detected
19