Table of Contents
Advertisement
Stowing the flat/spare tire, jack and tools
Remove the center wheel ornament by pushing from the reverse
1
side.
Lay down the tire with the valve
2
stem facing up and install the
holding bracket, inserting the
claw into the wheel lug nut hole.
Turn the jack handle extension
clockwise to take up slack in
the chain.
Then, check to ensure the claw
is in the wheel lug nut hole and
the holding bracket is centered
in the wheel hub.
Claw
Holding bracket
While raising, secure the tire,
taking care that the tire goes
straight up without catching on
any surrounding part to prevent
it from flying forward during a
collision or sudden braking.
Tightening torque:
34.7 ft·lbf (46.6 N·m, 4.8 kgf·m)
SEQUOIA_OM_USA_OM0C013U_19MY
7-2. Steps to take in an emergency
475
incorrect
correct
7
Advertisement
Table of Contents
