Toyota Sequoia 2019 Manual page 464

Hide thumbs Also See for Sequoia 2019:
Table of Contents

Advertisement

464
7-2. Steps to take in an emergency
Warning message
Pre-Collision System
Unavailable
Pre-Collision System
Unavailable
Clean Sensor
Release
Accelerator
*
: Refer to the separate "Scheduled Maintenance Guide" or "Owner's Manual
Supplement" for the maintenance interval applicable to your vehicle.
Warning message in radar cruise mode
In the following cases, the warning message may not be displayed even if
vehicle-to-vehicle distance decreases:
When your vehicle and the vehicle ahead are traveling at the same speed or
the vehicle ahead is traveling more quickly than your vehicle
When the vehicle ahead is traveling at a very low speed
Immediately after cruise control speed is set
At the instant the accelerator pedal is depressed
Warning buzzer
In some cases, the buzzer may not be heard because of noisy place or an
audio sound.
SEQUOIA_OM_USA_OM0C013U_19MY
Details/Actions
Indicates that the pre-collision system is tempo-
rarily unavailable.
 Please wait until the system returns. If the
message does not disappear, the system
may be malfunctioning. Have the vehicle
inspected by your Toyota dealer immedi-
ately.
Indicates that the pre-collision system sensor is
dirty, covered with ice, etc.
 Remove any dirt, ice, etc.
Indicates that the shift position was changed and
Drive-Start Control was operated while depress-
ing the accelerator pedal.
 Momentarily release the accelerator pedal.

Advertisement

Table of Contents
loading

Table of Contents