Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping, and safe-driving information. Air conditioning and multimedia systems, as well as Interior other interior features for a comfortable driving experi- features ence.
Page 2: Table Of Contents
TABLE OF CONTENTS Index 1-5. Refueling Before driving Opening the fuel tank cap........100 1-1. Key information 1-6. Theft deterrent system Keys ........30 Engine immobilizer system ......104 1-2. Opening, closing and locking Alarm ........106 the doors Wireless remote control ..31 1-7.
Page 3 2-3. Operating the lights and Interior features wipers Headlight switch....185 Fog light switch ....191 3-1. Using the air conditioning Windshield wipers and system and defogger washer ......193 Front air conditioning Rear window wiper and system......302 washer ......197 Rear air conditioning Headlight cleaner switch ..
Page 4 TABLE OF CONTENTS Index 3-3. Using the interior lights Luggage compartment features ......456 Interior lights list ....404 Garage door opener ... 461 • Personal/interior light main switch ....... 405 Compass ......467 • Personal/interior lights..406 • Interior light ...... 407 Maintenance and care 3-4.
Page 5 When trouble arises Vehicle specifications 5-1. Essential information 6-1. Specifications Emergency flashers .... 548 Maintenance data (fuel, oil level, etc.) ... 600 If your vehicle needs to be towed ........ 549 Fuel information....611 If you think something is Tire information ....616 wrong ........
Page 6 Pictorial index Exterior Windshield wipers P. 193  Moon roof P. 96 Hood Outside rear view P. 488 mirrors P. 84 Front side marker lights P. 185 Headlights (low beam) P. 185  Fog lights P. 191 Headlights (high beam) P.
Page 7 Stop/tail and rear side  marker lights P. 185 Roof luggage Tail lights P. 185  carrier P. 88 Rear window defogger P. 315 Fuel filler door P. 100 Back window P. 93 Side doors Rear window P. 35 wiper P.
Page 8 Pictorial index Interior Seat belts P. 69 Front console box P. 411 Head restraints P. 65 Horn P. 165 Bottle holders P. 428 SRS driver airbag P. 111 Cup holders P. 424 SRS front passenger airbag P. 111 Auxiliary boxes P.
Page 9 Personal/interior lights P. 406  Type A Moon roof switches Personal/interior lights P. 96 P. 406 Overhead console Rear seat entertainment * P. 422 system Conversation mirror SRS curtain shield P. 438 airbags P. 111 Assist grips Personal/interior P. 453 lights P.
Page 10 Pictorial index Interior Type B Personal/interior Personal/interior lights lights P. 406 P. 406 Rear seat entertainment Overhead console * system P. 422 SRS curtain shield Conversation mirror airbags P. 111 P. 438 Personal/interior Assist grips lights P. 406 P. 453 Vanity mirrors P.
Page 11 Door lock switch Driving position memory Inside door lock  switches P. 62 button P. 36 P. 35 Power window Auxiliary box Window lock switches P. 90 P. 429 switch P. 90  : If equipped : Refer to “NAVIGATION SYSTEM OWNER’S MANUAL”...
Page 12 Pictorial index Interior Cup holders P. 424 Ashtray P. 436 Shift lever P. 159 Map holder P. 415 Shift lock override button P. 587...
Page 13 Vehicles without rear seat entertainment system Rear air conditioning system P. 311 Cup holders P. 424 Power outlet P. 439...
Page 14 Pictorial index Interior Vehicles with rear seat entertainment system A/V input port Rear air conditioning system P. 311 Cup holders P. 424 Power outlet P. 439 Headphone jacks...
Page 15 Vehicles with rear console box Rear console box P. 419 Cup holders P. 424 Cup holders P. 424 Seat heater switches Auxiliary box P. 429 P. 446 : Refer to “NAVIGATION SYSTEM OWNER’S MANUAL”...
Page 16: Instrument Panel
Pictorial index Instrument panel Headlight switch P. 185 Turn signal lever P. 163  Fog light switch P. 191 Gauges and meters P. 166  Multi-information display P. 176 Windshield wipers and washer switch P. 193 Rear window wiper and washer switch P.
Page 17 Rear window defogger switch/  Rear window defogger and outside rear Multimedia system P. 318   view mirror defogger switch P. 315 Rear view monitor system P. 225  Windshield wiper de-icer P. 317 Accessory meter Security indicator P. 182 P.
Page 18 Pictorial index Instrument panel Emergency flasher switch P. 548 Accessory meter  control switches P. 182 Multi-information display Intuitive parking assist  control switches P. 176 switch P. 218 Front wheel drive control switch P. 248 Coin holder P. 410 Center differential lock switch P.
Page 19 Power back window switch P. 93 Engine (ignition) switch VSC OFF switch P. 253, 256, 258, 259 P. 156  : If equipped : 4WD models : 2WD models : Vehicles with multi-information display...
Page 20 Pictorial index Instrument panel    Audio remote control switches Telephone switches Talk switch Vehicle-to-vehicle Cruise control  distance button switch P. 200, 204 P. 204...
Page 21 Personal/interior light Tilt and telescopic steering  main switch P. 405 control switch Outside rear view Instrument panel light mirror switches control dial P. 84 P. 170  BSM main switch Tilt and telescopic steering P. 236  lock release lever P.
Page 22 Pictorial index Luggage compartment Shopping Seatback folding/ bag hook Power outlet returning switches P. 458 P. 439 P. 60 Power back Back door Child restraint Shopping  door switch strap anchor bracket bag hook P. 41 P. 42 P. 132 P.
Page 23: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 24 ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Vehicle data recordings Your Toyota is equipped with several sophisticated computers that will record certain data, such as: •...
Page 25 EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained •...
Page 26 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 27 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 28 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 29: Before Driving
Before driving 1-1. Key information 1-4. Opening and closing the windows and moon roof Keys ........30 Power windows ....90 1-2. Opening, closing and Power back window ... 93 locking the doors Moon roof......96 Wireless remote control ..31 1-5.
Page 30: 1-1. Key Information
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (P. 588) NOTICE ■...
Page 31: 1-2. Opening, Closing And Locking The Doors
1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles with power back door Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 32 1-2. Opening, closing and locking the doors ■ Panic mode When is pushed for longer than about one second, an alarm will sound for about 60 seconds and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, push any button on the wireless remote control.
Page 33 ■ Customization ● That can be configured at Toyota dealer (vehicles without multi-informa- tion display) Settings (e.g. wireless remote control) can be changed. (Customizable features P. 627) ●...
Page 34 1-2. Opening, closing and locking the doors ■ Certification for wireless remote control MODEL/FCC IDs: Transmitter: GQ43VT20T Receiver: GQ4-34R IC (Canada) IDs: Transmitter: 1470A-1T Receiver: 1470A-6R MADE IN USA This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Page 35: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. ■ Wireless remote control P. 31 ■ Locks all doors Closes the windows and moon roof (turn and hold) Unlocks all doors Turning the key unlocks the...
Page 36 1-2. Opening, closing and locking the doors ■ Inside door lock button Locks the door Unlocks the door Pulling the door handle can open the front door even if the inside door lock button is in the lock position. Locking the front doors from the outside without a key Move the inside door lock button to the lock position.
Page 37 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 38 1-2. Opening, closing and locking the doors ■ Setting and canceling the functions Vehicles with multi-information display P. 179 Vehicles without multi-information display To switch between setting and canceling, follow the procedure below: Close all the doors and turn the engine switch to the ON posi- tion.
Page 39 1-2. Opening, closing and locking the doors ■ When locking the doors using the key The door cannot be locked if the key is in the engine switch. ■ Key reminder buzzer A buzzer sounds if the driver’s door is opened, while the engine switch is in the ACC or LOCK position to remind you to remove the key.
Page 40: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Unlocks all doors Opens the back window (turn and hold) Locks all doors Closes the back window (turn and hold) Door lock switches...
Page 41 1-2. Opening, closing and locking the doors ■ Opening the back door from inside the vehicle (vehicles with power back door) Push and hold the switch to open/close. Power back door switch (vehicles with power back door) Push and hold the switch to close.
Page 42 1-2. Opening, closing and locking the doors Rear step bumper For rear end protection and eas- ier step-up loading. To get on the rear step bumper, use the shaded area in the illus- tration. ■ Back door strap Use the strap when closing. ■...
Page 43 ■ Customization that can be configured at Toyota dealer Settings (e.g. power back door) can be changed. (Customizable features P. 627) CAUTION ■...
Page 44 1-2. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 45 When installing an accessory part to the back door, using a genuine Toyota part is recommended. ■ Back door closer (vehicles with a power back door) ●...
Page 46 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended. ■...
Page 47 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other Damper stay rod than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 48: Adjustable Components (Seats, Mirrors, Steering Wheel)
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Passenger’s seat Driver’s seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Seat cushion (front) angle adjustment knob Seat lumbar support adjustment switch...
Page 49 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Passenger’s seat Driver’s seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch Driver’s seat leg support adjustment switch (if equipped) Seat lumbar support adjustment switch...
Page 50 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment ● Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of...
Page 51: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats ■ Second seats Separated seat Seat position adjustment lever Seatback angle adjustment lever...
Page 52 1-3. Adjustable components (seats, mirrors, steering wheel) Bench seat Seat position adjustment lever Seatback angle adjustment lever :The second center seat can be moved forward further than side seats.
Page 53 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Third seats Manual seat Seatback angle adjustment lever...
Page 54 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seatback angle adjustment switch Seatback folding/returning switch Moving a second seat for third seat access ■ Getting in the vehicle Pull up the lever and fold down the seatback. The seat will slide forward.
Page 55 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the vehicle Depress the release pedal and fold down the seatback. The seat will slide forward. Move the seat to the front-most position Make sure that no passenger is seated on the second seat before depressing the release pedal.
Page 56 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the second seat Separated seat Pull the lever to unlock the seat- back and then fold the seatback down. Bench seat Pull the lever to unlock the seat- back and then fold the seatback down.
Page 57 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seat ■ Before folding down the third seat To release the hooked end tab, insert the key or concaved end tab into the hole on the buckle. Retract the belt slowly when releasing and stowing the seat belt.
Page 58 1-3. Adjustable components (seats, mirrors, steering wheel) Adjust the center head restraint to the downmost position. Stow the third seat belt buckles.
Page 59 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the third seat (manual seat) Pull the head restraint lock release lever to fold the head restraint. Pull the lever to unlock the seatback and then fold the seat- back down. From rear door side From back door side...
Page 60 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding down the third seat (power seat) From rear door side Press and hold the seatback folding switch until the seatback folds down fully and the buzzer sounds. The outside head restraints are folded automatically.
Page 61 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ When adjusting a rear seat ● Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
Page 62: Driving Position Memory (Driver's Seat)
1-3. Adjustable components (seats, mirrors, steering wheel)  Driving position memory (driver’s seat) Your preferred driving position (the position of the driver’s seat, steering wheel and outside rear view mirrors) can be entered into the computer’s memory and recalled with the touch of a button. Two different driving positions can be entered into memory.
Page 63 1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Memorized driving positions can be recalled when you unlock the driver’s door using the wireless remote control and open the driver’s door. ■ Setting the linked door unlock operation Set the driving positions into the memory system using the “1”...
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Retained accessory power Each memorized position (except for the tilt and telescopic steering column) can be activated within 30 seconds after the driver’s door is opened, even if the key is not in the engine switch. ■...
Page 65: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment Pull the head restraints up. Down Push the head restraint down while pushing the lock release Lock release button button. Second center and outside seats Vertical adjustment...
Page 66 1-3. Adjustable components (seats, mirrors, steering wheel) Third outside seats To use Lift up the head restraint until it locks. To fold Pull the head restraint lock release lever to fold the head restraint. ■ Removing the head restraints Front seats Pull the head restraint up while pushing the lock release button.
Page 67 1-3. Adjustable components (seats, mirrors, steering wheel) Third seats Pull the head restraint up while pushing the lock release button. The head restraint of outside seat can- not be removed. ■ Installing the head restraints Front seats Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 68 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints (front and second outside seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■...
Page 69: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel) Releasing the belt Press the release button. ■ Adjusting the height of the belt Down Move the height adjuster up and down as needed until you hear a click.
Page 71 1-3. Adjustable components (seats, mirrors, steering wheel) Third center seat belt The third center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure that the buckle securely latched for ready use of the center seat belt.
Page 72 1-3. Adjustable components (seats, mirrors, steering wheel) Stow the seat belt tabs in the cover set in the roof as shown. ■ Extracting the belt Pull the belt out partially, and then remove the tabs from the cover. Seat belt comfort guide (third center seat) If the shoulder belt sits close to a person’s neck, use the seat belt comfort guide.
Page 73 1-3. Adjustable components (seats, mirrors, steering wheel) Slide the belt past the slot of the guide. The elastic cord must be behind the seat belt. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal...
Page 74 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 75 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system.
Page 76 ● If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. ■ Seat belt damage and wear ●...
Page 77 Seat belt damage and wear ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 78 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
Page 79: Steering Wheel (Manually Adjustable Type)
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (manually adjustable type) The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertically.
Page 80: Steering Wheel (Power-Adjustable Type)
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (power-adjustable type) The steering wheel can be adjusted to a comfortable position. Down Toward the driver Away from the driver Auto tilt away When the key is removed from the engine switch, the steering wheel returns to its stowed posi- tion by moving up and away to enable easier driver entry and...
Page 81: Anti-Glare Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position...
Page 82 1-3. Adjustable components (seats, mirrors, steering wheel) Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light. Turns automatic mode ON/ The indicator comes on when automatic mode is turned on.
Page 83 1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. ■ If a sun visor interferes with the mirror Hold and rotate the mirror to adjust the support.
Page 84: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch when the engine switch is in the ACC or ON position. Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.
Page 85 1-3. Adjustable components (seats, mirrors, steering wheel) From inside (if equipped) Press the switch. Pressing again will unfold the mir- rors. Linked mirror function when reversing (if equipped) Press the switch to turn on/off linked mirror function. The outside rear view mirrors will automatically tilt downwards...
Page 86 1-3. Adjustable components (seats, mirrors, steering wheel) ■ When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. (P. 315) ■ Automatic adjustment of the mirror angle (vehicles with driving posi- tion memory) A desired mirror face angle can be entered to memory and recalled automat- ically by the driving position memory.
Page 87 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE ■ If the mirrors are frozen Do not operate the control or scrape the mirror faces. Use a spray de-icer to free the mirror.
Page 88: Roof Luggage Carrier
1-3. Adjustable components (seats, mirrors, steering wheel)  Roof luggage carrier Roof rails Cross rails Adjustment the position of cross rails Turn the knobs counterclockwise to loosen the cross rails. Slide the cross rails to the appro- priate position for loading lug- gage.
Page 89 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Cross rail adjustment Make sure the cross rails are locked securely by applying pressure forward and rearward. Failure to do so may cause an accident, death or serious injury in the event of emergency braking or a collision.
Page 90: Opening And Closing The Windows And Moon Roof
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing (Front windows only) Opening One-touch opening (Front windows only) : To stop the window partway, operate the switch in the oppo- site direction.
Page 91 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Page 92 1-4. Opening and closing the windows and moon roof ■ Customization that can be configured at Toyota dealer Settings (e.g. power windows) can be changed. (Customizable features P. 627) CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury.
Page 93: Power Back Window
1-4. Opening and closing the windows and moon roof Power back window The power back window can be opened and closed using the switch and key. From inside One-touch closing Closing One-touch opening Opening :Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 94 1-4. Opening and closing the windows and moon roof ■ The power back window can be operated when ● The engine switch is in the ON position. ● The power back window can be opened when the rear window wiper is working.
Page 95 If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■ Customization that can be configured at Toyota dealer Settings (e.g. power back window) can be changed. (Customizable features P. 627) CAUTION ■...
Page 96: Moon Roof
1-4. Opening and closing the windows and moon roof  Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open The moon roof stops slightly before the fully open position to reduce wind noise.
Page 97 Check to make sure that the moon roof is com- pletely stopped and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 98 An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch off. ■ Customization that can be configured at Toyota dealer Settings (e.g. moon roof) can be changed. (Customizable features P. 627)
Page 99 1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehi- cle while it is moving.
Page 100: Refueling Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch off and ensure that all the doors and win- dows are closed. ■ Opening the fuel tank cap Open the fuel filler door.
Page 101 1-5. Refueling Hang the fuel tank cap on the back of the fuel filler door. Closing the fuel tank cap When installing the fuel tank cap, turn it until you hear a click. The cap will turn slightly to the opposite direction when released.
Page 102 1-5. Refueling ■ Identifying flex-fuel vehicles ● Flex-fuel vehicles can be identified by the fuel tank cap, which is marked “FLEXFUEL E85/GASOLINE”. ■ Fuel tank capacity Approximately 26.4 gal. (100 L, 22.0 Imp. gal.) ■ E85 Fueling Stations (Flex-fuel vehicles) E85 fueling stations and fuel pumps can be identified by the indication “E85 85% Ethanol”.
Page 103 ■ When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury. NOTICE ■...
Page 104: 1-6. Theft Deterrent System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
Page 105 1-6. Theft deterrent system FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For vehicles sold in Canada This device complies with Industry Canada licence-exempt RSS stan- dard(s).
Page 106: Alarm
1-6. Theft deterrent system Alarm The system sounds the alarm and flashes lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set. ● A locked door is unlocked or opened in any way other than using the wireless remote control door lock function or key.
Page 107 1-6. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. ● Nobody is in the vehicle. ●...
Page 108 1-6. Theft deterrent system ■ Alarm-operated door lock ● When the alarm is operating, the doors are locked automatically to pre- vent intruders. ● Do not leave the key inside the vehicle when the alarm is operating, and make sure the key is not inside the vehicle when recharging or replacing the battery.
Page 109: 1-7. Safety Information
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (P. 48) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 110 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 111: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 112 1-7. Safety information Airbag system components Side airbags Curtain shield airbag sen- sors AIR BAG ON and AIR BAG OFF indicator lights SRS warning light Curtain shield airbags Driver’s seat position sen- Front passenger airbag Driver airbag Knee airbags Driver’s seat belt buckle Side and curtain shield air- switch bag sensors...
Page 113 1-7. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 114 1-7. Safety information ■ Operating conditions (front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12-18 mph [20-30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 115 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 116 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 117 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 118 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 119 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 120 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 121 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean any- thing against areas such as the dash- board, steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 122 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer.
Page 123: Front Passenger Occupant Classification System
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 124 1-7. Safety information Conditions and operation of the front passenger occupant classification system ■ Adult AIR BAG ON and AIR BAG OFF indica- AIR BAG ON tor lights Indicator/ SRS warning light warning light Front passenger’s seat belt reminder Flashing light Front passenger airbag Front passenger knee airbag...
Page 125 1-7. Safety information ■ Unoccupied AIR BAG ON and AIR BAG OFF indica- Not illumi- tor lights nated Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Front passenger knee airbag Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front passen-...
Page 126 1-7. Safety information : When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending on his/her physique or posture. : Never install a rear-facing child restraint system on the front pas- senger seat.
Page 127 Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. ● Child restraint systems installed on the rear seat should not contact the front seatbacks.
Page 128: Child Restraint Systems
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 129 1-7. Safety information Forward facing — Convertible seat Booster seat ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belts. ●...
Page 130 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 131 1-7. Safety information CAUTION ■ Child restraint precautions ● Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or accident.
Page 132: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 133 1-7. Safety information ■ Using the seat belts Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt) (P. 69 ■ Using the top tether strap Anchor brackets (for top tether strap) Second seats (Separated seat) Anchor brackets are provided for all of the second seats.
Page 134 1-7. Safety information Second seats (Bench seat) Anchor brackets are provided for all of the second seats. Third seats Anchor bracket is provided for the third center seat. Installation with LATCH system (second seat only) Second seat (except center seat) Fold the seatback while pulling the lever.
Page 135 1-7. Safety information Second center seat (bench seat) Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 8th lock position. (P. 51) 1st lock position 8th lock position Type A...
Page 136 1-7. Safety information Type B Latch the hooks of the lower straps onto the LATCH anchors tighten the lower straps. The anchors are installed in the lower seatback under a flap. Confirm the position of the anchors below the sym- bol in the seatback.
Page 137 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing Infant seat/convertible seat ■ Place the child seat on the rear seat facing the rear of the vehi- cle. Run the seat belt through the child seat and insert the plate into the buckle.
Page 138 1-7. Safety information While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 139 1-7. Safety information While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 140 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Second seat Secure the child restraint using the LATCH anchors or seat belt, and adjust the head restraint to the upmost position.
Page 141 1-7. Safety information Second seat Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Hook Top tether strap Anchor bracket Third center seat Open the anchor bracket cover. Latch the hook onto the anchor bracket and tighten the top tether strap.
Page 142 1-7. Safety information ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. CAUTION ■...
Page 143 1-7. Safety information CAUTION ■ When installing a child restraint system ● Only put a forward-facing or booster child seat on the front seat when unavoidable. When installing a forward- facing or booster child seat on the front passenger seat, move the seat as far back as possible even if the AIR BAG OFF indicator light is illuminated.
Page 144 1-7. Safety information CAUTION ■ When installing a child restraint system (vehicles with bench type sec- ond seat) Observe the following precautions. Failure to do so may cause death or serious injury to the child or other pas- sengers in the event of a sudden stop or accident. ●...
Page 145: When Driving
When driving 2-1. Driving procedures 2-4. Using other driving systems Driving the vehicle.... 146 Cruise control....200 Dynamic laser cruise Engine (ignition) switch ..156 control ......204 Automatic transmission..159 Intuitive parking assist..218 Turn signal lever ....163 Rear view monitor Parking brake....
Page 146: 2-1. Driving Procedures
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine (P. 156) ■ Driving With the brake pedal depressed, shift the shift lever to D. (P. 159) Release the parking brake. (P.
Page 147 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down operation.
Page 148 2-1. Driving procedures ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 603) ■ When turning off the engine The emission system operating sounds may continue for a short time after the engine is turned off.
Page 149 Have the vehicle inspected by your Toyota dealer immediately. ● Do not shift the shift lever to P while the vehicle is moving.
Page 150 2-1. Driving procedures CAUTION ■ When driving the vehicle ● Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury.
Page 151 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly and unexpectedly, and may cause an accident. ●...
Page 152 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in...
Page 153 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 154 If you hear a squealing or scraping noise while driving (brake pad wear limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 155 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ● Brake function ●...
Page 156: Engine (Ignition) Switch
2-1. Driving procedures Engine (ignition) switch ■ Engine switch LOCK The steering wheel is locked and the key can be removed. (The key can be removed only when the shift lever is in P.) Some electrical components such as the audio system can be used.
Page 157 2-1. Driving procedures ■ Turning the key from ACC to LOCK Shift the shift lever to P. (P. 159) Push in the key and turn to the LOCK position. ■ Steering lock release When starting the engine, the engine switch may seem stuck in the LOCK posi- tion.
Page 158 2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the engine switch in the ACC or ON position for long periods if the engine is not running. ■ When starting the engine ● Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems.
Page 159: Automatic Transmission
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever While the engine switch is on, depress the brake pedal and move the shift lever. ■ Shift position uses Shift position Function Parking the vehicle or starting the engine Reversing...
Page 160 2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 5 or 4 accord- ing to vehicle speed. However, the initial shift range may be set to 3 or 2 if the AI-SHIFT has operated while the shift lever was in the D ...
Page 161 If the S indicator does not come on even after shifting the shift lever to This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer, immediately. (In this situation, the vehicle will operate as if the shift lever is in D.) ■...
Page 162 2-1. Driving procedures ■ Downshifting restrictions warning buzzer (in the S mode) To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever is operated. (The warning buzzer will sound twice.) ■...
Page 163: Turn Signal Lever
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 164: Parking Brake
2-1. Driving procedures Parking brake parking brake*. (Depressing the pedal again releases the parking brake.) U.S.A. Canada At this time, the indicator will come on. *: Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot.
Page 165: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel (vehicles with manual tilt and tele- scopic steering) Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P.
Page 166: Instrument Cluster Gauges And Meters
2-2. Instrument cluster Gauges and meters Vehicles with multi-information display The following gauges, meters and displays illuminate when the engine switch is in the ON position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank.
Page 167 2-2. Instrument cluster Multi-information display P. 176 Automatic transmission fluid temperature gauge Displays the automatic transmission fluid temperature.
Page 168 2-2. Instrument cluster Vehicles without multi-information display The following gauges, meters and displays illuminate when the engine switch is in the ON position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Voltmeter Displays the charge state.
Page 169 2-2. Instrument cluster Odometer/trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display differ- ent distances independently.
Page 170 While driving ● When the voltmeter indicates more than 19 V or less than 9 V, the battery may be malfunctioning. Have your vehicle checked at your Toyota dealer. ● When the engine oil pressure gauge does not work properly, immediately stop the engine and contact your Toyota dealer.
Page 171: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster (vehicles with multi-information display) Instrument cluster (vehicles without multi-information display)
Page 172 2-2. Instrument cluster Center panel Outside rear view mirrors [vehicles with BSM (Blind Spot Moni- tor)]...
Page 173 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Tail light indicator (P. 163) (P. 185) (Canada) Headlight high beam AUTO LSD indicator indicator (P. 189) (P. 253, 256) Security indicator Center differential lock (P.
Page 174 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 175 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 176: Multi-Information Display
2-2. Instrument cluster  Multi-information display The multi-information display presents the driver with a variety of driving-related data. ● Trip information (P. 176) Displays driving range, fuel consumption and other cruis- ing-related information. ● Warning messages (P. 568) Automatically displayed when a malfunction occurs in one of the vehicle’s systems.
Page 177 2-2. Instrument cluster Zoom display of odometer and trip meters Displays the odometer and one of the trip meters simultaneously. Average Fuel Economy Displays the average fuel consumption since the function was reset. ● The function can be reset by pushing the SELECT RESET button for more than 2 seconds when the Average Fuel Economy is displayed.
Page 178 2-2. Instrument cluster Trip Timer Displays the driving time. To calculate the driving time, press the SELECT RESET button, and to stop the calculation, press it again. To reset the calculation, press the SELECT RESET button for more than 2 seconds. Average Speed Displays the average vehicle speed since the engine was started or the function was reset.
Page 179 2-2. Instrument cluster Feature customization The vehicle can be customized while the vehicle is stopped. Press the SETUP button to select the item you want to cus- tomize unit. UNITS KEYLESS ENTRY FEEDBACK KEYLESS ENTRY RELOCK TIMER KEYLESS ENTRY ALL DOORS UNLOCK DOOR AUTO LOCKING DOOR AUTO UNLOCKING HEADLAMPS AUTO OFF TIMER...
Page 180 2-2. Instrument cluster Items Screen text Select in this order Double switch KEYLESS ENTRY operation to 1 PRESS 2 PRESSES ALL DOORS unlock all the UNLOCK doors ABOVE 12 MPH SHIFT OUT Automatic door DOOR AUTO OF PARK (20 km/h) LOCKING locking function DRIVER DOOR...
Page 181 ■ Feature customization error • If SYSTEM ERROR message is indicated, turn the engine switch off and then on again. • If SYSTEM ERROR message is indicated again, contact your Toyota dealer. CAUTION ■ Caution while driving Do not adjust the display.
Page 182: Accessory Meter
2-2. Instrument cluster Accessory meter Outside temperature display Displays the outside air temperature. (P. 434) Outside temperature and trip information display (if equipped) Displays the outside temperature and trip information. (P. 169434) Clock (P. 433) H (Hour) button P. 433 (...
Page 183 2-2. Instrument cluster Outside temperature and trip information display (if equipped) Every time the INFO button is pushed, the display toggles through these information. ● OUTSIDE (outside temperature display) Displays the outside air temperature. ● AVG (average fuel consumption after refueling) Displays the average fuel consumption since the vehi- cle was last refueled.
Page 184 2-2. Instrument cluster ● Display off ■ The accessory meter can be operated when The engine switch must be in the ON position. ■ To select the unit A (English/U.S. customary system) or unit B (metric unit) (vehicles without multi-information display) Press the SETUP button to change the units.
Page 185: Headlight Switch
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Type A Vehicles with day- time running light system: The daytime running lights turn side marker, U.S.A. Canada parking, tail, license plate, daytime run- ning lights equipped) and instru-...
Page 186 2-3. Operating the lights and wipers Type B Vehicles with day- time running light system: The daytime running lights turn side marker, U.S.A. Canada parking, tail, license plate, daytime run- ning lights equipped) and instru- ment panel lights turn The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 187 2-3. Operating the lights and wipers Type C The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time running lights instruments panel lights turn on automati- cally. (When engine switch is in the ON position) side marker, parking, tail, license...
Page 188 2-3. Operating the lights and wipers Type D The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time running lights instruments panel lights turn on automati- cally. (When engine switch is in the ON position) side marker, parking, tail, license...
Page 189 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 190 ■ Customization ● That can be configured at Toyota dealer. (vehicles without multi-informa- tion display) Settings (automatic light off system) can be changed. (Customizable features P. 627) ● It is possible to change the settings. (vehicles with multi-information dis- play) (Feature customization P.
Page 191: Fog Light Switch
2-3. Operating the lights and wipers  Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Type A Front fog lights ON ...
Page 192 2-3. Operating the lights and wipers Type B Front fog lights ON...
Page 193: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation (when is selected.) Type A Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation Increases the intermittent...
Page 194 2-3. Operating the lights and wipers Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts. Type B Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation...
Page 195 2-3. Operating the lights and wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts. ■ The windshield wiper and washer can be operated when The engine switch must be in the ON position.
Page 196 Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 197: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The rear window wiper oper- ates while the washer squirts.
Page 198 ● The engine switch must be in the ON position. ● The back window is fully closed. ■ Customization that can be configured at Toyota dealer Settings (e.g. washer linkage wiper control) can be changed. (Customizable featuresP. 627) NOTICE ■...
Page 199: Headlight Cleaner Switch
2-3. Operating the lights and wipers  Headlight cleaner switch Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. ■ The headlight cleaner can be operated when The engine switch is in the ON position and the headlights are turned on. NOTICE ■...
Page 200: 2-4. Using Other Driving Systems
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicator Cruise control switch ■ Setting the vehicle speed Press the ON-OFF button to activate the cruise control. Cruise control indicator will come on.
Page 201 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 202 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 203 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the ON-OFF button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 204: Dynamic Laser Cruise Control
2-4. Using other driving systems  Dynamic laser cruise control Dynamic laser cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
Page 205 2-4. Using other driving systems ■ Setting the vehicle speed (vehicle-to-vehicle distance con- trol mode) Press the ON-OFF button to activate the cruise control. Cruise control indicator will come on. Press the button again to deactivate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
Page 206 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 207 2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Pressing the button changes Preceding vehicle mark vehicle-to-vehicle dis- tance as follows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the ON position. If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
Page 208 2-4. Using other driving systems ■ Canceling and resuming the speed control Pulling the lever toward you cancels the cruise control. The speed setting is also can- celed when the brakes are applied. Pushing lever resumes the cruise control and returns vehicle speed to the set speed.
Page 209 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a laser radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to main- tain a suitable following distance from the vehicle ahead.
Page 210 2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.
Page 211 2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 212 (4WD models) :Vehicle-to-vehicle distance control driving must be reset by pressing the ON-OFF button again. If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
Page 213 2-4. Using other driving systems ■ Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following sit- uations: ● Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehicle speed At this time, the memorized set speed is not retained.
Page 214 2-4. Using other driving systems CAUTION ■ Before using dynamic laser cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes etc.
Page 215 2-4. Using other driving systems CAUTION ■ Situations unsuitable for dynamic laser cruise control Do not use dynamic laser cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 216 2-4. Using other driving systems CAUTION ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the approach warning (P.
Page 217 If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Toyota dealer. ● Do not disassemble the sensor.
Page 218: Intuitive Parking Assist
2-4. Using other driving systems  Intuitive parking assist The intuitive parking assist is designed to inform you of the approxi- mate distance between your vehicle and an obstruction by indicator and buzzer when parking the vehicle. This system uses sensors to detect obstructions.
Page 219 2-4. Using other driving systems ■ Intuitive parking assist switch Press the switch to turn on. (To turn off, press the switch again.) When on, the buzzer sounds to inform the driver that the system is operational. At this time, the indicator will come The distance and buzzer ■...
Page 220 2-4. Using other driving systems Rear corner sensors Distance shown Indicator Zone in in. and buzzer (mm) Approximately 33.5 — 20.5 Intermittent (850 — 520) Approximately Fast 20.5 — 15.7 intermittent (520 — 400) Approximately Near 15.7 (400) or Continuous less Front corner sensors Distance shown...
Page 221 2-4. Using other driving systems ■ When two or more obstacles are detected simultaneously The buzzer system responds to the nearest zone. ■ When multiple obstacles are detected in front and behind the vehicle at the same time The buzzer will change in the following manner. ●...
Page 222 2-4. Using other driving systems Sensors that operate and detection range The following diagrams show the sensor detection range. Note that sensors may not be able to detect obstacles that are extremely close to the vehicle. ■ Detection range of the sensors Back sensors Rear corner sensors Front corner sensors...
Page 223 Objects lower than the sensors or thin stakes etc. may be detected ini- tially, but as they draw closer, they may cease to be detected. • A towing hitch is mounted to the vehicle. • A non-genuine Toyota suspension (lowered suspension etc.) is installed. • When attaching a two-way radio antenna.
Page 224 This ISM device complies with Canadian ICES-001. ■ If the indicator is continuously on Have the vehicle inspected by your Toyota dealer. ■ If the indicator remains blinking but do not sound the buzzer Clean the sensors with soft cloth.
Page 225: Rear View Monitor System
2-4. Using other driving systems Rear view monitor system The rear view monitor system assists the driver by displaying guide lines and an image of the view behind the vehicle while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
Page 226 2-4. Using other driving systems Using the rear view monitor system ■ Screen description Vehicle width guide lines The line indicates a guide path when the vehicle is being backed straight The displayed width is wider than the actual vehicle width. Vehicle center guide lines These lines indicate the estimated vehicle center on the ground.
Page 227 2-4. Using other driving systems Rear view monitor system precautions ■ Area displayed on screen The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. To adjust the image on the rear view monitor system screen.
Page 228 2-4. Using other driving systems ■ Rear view monitor system camera The camera for the rear view monitor system is located as shown in the illustration. ● Using the camera If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow or mud adhere to the lens, rinse it with water and wipe with a soft cloth.
Page 229 2-4. Using other driving systems ■ Differences between the screen and the actual road The distance guide lines and the vehicle width guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually. The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so.
Page 230 2-4. Using other driving systems ● When the ground behind the vehicle slopes down sharply The distance guide lines will appear to be further from the vehicle than the actual distance. Because of this, objects will appear to be closer than they actually are.
Page 231 2-4. Using other driving systems ● Distance guidelines Visually check the surroundings and the area behind the vehicle. On the screen, it appears that a truck is parked at point . How- ever, in reality if you back up to point , you will hit the truck.
Page 232 If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Symptom Likely cause Solution •...
Page 233 • The vehicle is used on an incline. vehicle’s surround- out of align- ings. ment Have the vehicle The camera position is out of inspected by your alignment. Toyota dealer.
Page 234 2-4. Using other driving systems CAUTION ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to check visually behind and all around the vehicle before proceeding. Observe the following precautions to avoid an accident that could result in death or serious injuries.
Page 235 ● Do not expose the camera to strong impact as this could cause a malfunc- tion. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible.
Page 236: Bsm (Blind Spot Monitor)
2-4. Using other driving systems  BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that assists the driver to confirm safety when changing lanes. The system uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehi- cles existence via the outside rear view mirror indicator.
Page 237 2-4. Using other driving systems The Blind Spot Monitor system detection areas The blind spot that vehicles can be detected in are outlined below. The range of the detection area extends to: Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ft.
Page 238 2-4. Using other driving systems ■ Conditions under which the Blind Spot Monitor will not detect a vehicle The Blind Spot Monitor is not designed to detect the following types of vehi- cles and/or objects: ● Vehicles traveling in the opposite direction ●...
Page 239 2-4. Using other driving systems ● Instances of the Blind Spot Monitor unnecessarily detecting a vehicle and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guard- rail, wall etc. •...
Page 240 2-4. Using other driving systems For vehicles sold in Canada IC: 4135A-BSDTX This device complies with the radio standards specification RSS-220 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 241 If the sensor moves even slightly off position, the system may mal- function and vehicles that enter the detection area may not be detected. If the sensor or surrounding area is subject to a strong impact, always have the area inspected by your Toyota dealer. ● Do not disassemble the sensor.
Page 242: Electronically Modulated Air Suspension
2-4. Using other driving systems  Electronically modulated air suspension The electronically modulated air suspension allows the driver to control the vehicle’s height in order to adjust for driving conditions. Select the desired height with the height control switch. Height control switch Height control mode select switch Selecting vehicle height...
Page 243 2-4. Using other driving systems ■ Height modes ● N mode (normal mode): For ordinary driving Normal height ● HI mode (high mode): For driving on bumpy roads 1.2 in. (30 mm) higher than the normal height The HI mode is unavailable when the vehicle’s speed exceeds 18 mph (30 km/h).
Page 244 2-4. Using other driving systems ■ Automatic leveling function Regardless of the number of occupants or the luggage load, vehicle height in any mode is always adjusted to a fixed height by the automatic leveling function. ■ When HI mode is selected The vehicle height will change to N mode when driving at the speeds of 18 mph (30 km/h).
Page 245 2-4. Using other driving systems CAUTION ■ The electronically modulated air suspension must be turned off in the following circumstances: Otherwise, the automatic leveling function may cause the vehicle’s height to change, and you may catch part of your body in the vehicle, resulting in an unexpected accident: ●...
Page 246 2-4. Using other driving systems NOTICE ■ Be careful in any place where overhead space is limited. When changing to a higher mode or after unloading, the vehicle height will rise. This may cause damage to the vehicle. ■ Do not select LO mode when driving on bumpy roads. If the underbody of the vehicle touches a rugged road surface, the vehicle may be damaged.
Page 247: Avs (Adaptive Variable Suspension System)
2-4. Using other driving systems  AVS (Adaptive Variable Suspension System) AVS controls the suspension according to the road and driving con- ditions. Selecting an optimum driving mode allows good vehicle posture and steering wheel operation. Sport mode For winding mountain road driving or high speed driving.
Page 248: Four-Wheel Drive System
2-4. Using other driving systems  Four-wheel drive system Use the front wheel drive control switch to select the following trans- fer modes. : Vehicles with multi-information display : Vehicles without multi-information display 2WD (high speed position, two-wheel drive) Normal driving. 4H (high speed position, four-wheel drive) Greater traction than two wheel drive.
Page 249: Center Differential Lock Switch
2-4. Using other driving systems Shifting between 4H and 4L ■ Shifting from 4H to 4L Stop the vehicle completely. Shift the shift lever to N. Push and turn the front wheel drive control switch fully clock- wise. Maintain this condition until the 4LO indicator turns on. ■...
Page 250 2-4. Using other driving systems ■ Shifting between 2WD and 4H ● Reduce your speed to less than 62 mph (100 km/h) and set the front wheel drive control switch between 2WD and 4H. When the ambient temperature is 5.0°F (-15°C) or lower, shifting from 2WD to 4H cannot be performed with the vehicle speed above 43 mph (70 km/h).
Page 251 In this case, you may not be able to shift between 2WD and 4H, 4H and 4L, and the cen- ter differential lock may not be operable. Have the vehicle inspected by your Toyota dealer immediately. ■ Shifting to 4L position The VSC OFF indicator will come on.
Page 252 2-4. Using other driving systems CAUTION ■ Shifting from 2WD to 4H while driving Never operate the front wheel drive control switch if the wheels are slipping. Stop the slipping or spinning before shifting. ■ When the vehicle is parked If the shift lever is moved before the 4LO indicator turns on/off, the transfer mode may not be shifted completely.
Page 253: Auto Lsd System
2-4. Using other driving systems AUTO LSD system The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when one of the rear wheels spin- ning occurs in a ditch or rough surface.
Page 254: When Auto Lsd System Is Operating
2-4. Using other driving systems When the AUTO LSD system is operating If the rear wheels spin, the slip indicator flashes to indicate that the AUTO LSD system has con- trolled the spinning of the rear wheels. ■ If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned off.
Page 255: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 256 2-4. Using other driving systems When VSC/Trailer Sway Control/TRAC/A-TRAC are operating The slip indicator will flash while VSC/Trailer Sway Con- trol/TRAC/ A-TRAC systems are operating. To disable VSC, Trailer Sway Control and/or TRAC (2WD models and 2WD mode on 4WD models) If the vehicle gets stuck in fresh snow or mud, VSC, Trailer Sway Control and/or TRAC may reduce power from the engine to the wheels.
Page 257 2-4. Using other driving systems ■ AUTO LSD mode Stop the vehicle completely, and press the VSC OFF switch for more than 3 seconds, when the system is in the TRAC OFF mode. The VSC OFF and AUTO LSD indicators will come on. The system is in TRAC off, AUTO LSD on and VSC, Trailer Sway Control off mode.
Page 258 2-4. Using other driving systems To disable VSC, Trailer Sway Control and/or A-TRAC (4H mode on 4WD models) If the vehicle gets stuck in fresh snow or mud, VSC, Trailer Sway Control and/or A-TRAC may reduce power from the engine to the wheels.
Page 259 ■ When the TRAC OFF indicator comes on even if the VSC OFF switch has not been pressed TRAC cannot be operated. Contact your Toyota dealer. ■ Sounds and vibrations caused by the ABS, TRAC, A-TRAC, VSC, Trailer Sway Control and brake assist system ●...
Page 260: Tires
2-4. Using other driving systems ■ If the brake system overheats TRAC or A-TRAC will cease operation, and the slip indicator will change from flashing to being on continuously to alert the driver. Stop the vehicle in a safe place. (There is no problem with continuing normal driving.) ■...
Page 261: Tires
The ABS, VSC and Trailer Sway Control will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the driving assist systems, and may cause the system to malfunction.
Page 262 2-4. Using other driving systems CAUTION ■ If trailer sway occurs Observe the following precautions. Failing to do so may cause death or serious injury. ● Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel. ●...
Page 263: 2-5. Driving Information
2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 264 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 265 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 266 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 267 2-5. Driving information NOTICE ■ To prevent the water damage ● Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ●...
Page 268: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
Page 269 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle...
Page 270 2-5. Driving information As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
Page 271 Roof luggage carrier precautions To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: ●...
Page 272 2-5. Driving information CAUTION ■ Roof luggage carrier precautions ● If driving for a long distance, on rough roads, or at high speeds, stop the vehicle now and then during the trip to make sure the cargo remains in its place. ●...
Page 273: Vehicle Load Limits
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. ■ Total load capacity (vehicle capacity weight): (P. 601) Total load capacity means the combined weight of occupants, cargo and luggage.
Page 274: Tires
2-5. Driving information CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.
Page 275: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 276 2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P without setting the parking brake.
Page 277: Tires
2-5. Driving information Regulations on the use of snow chains ● Regulations regarding the use of tire chains vary according to loca- tion and type of road. Always check local regulations before install- ing chains. ● Install the chains on the rear tires. ●...
Page 278: Tires
NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota deal- ers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters.
Page 279: Trailer Towing
To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional...
Page 280 2-5. Driving information Towing related terms ■ GCWR (Gross Combination Weight Rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the cargo in the trailer).
Page 281 2-5. Driving information ■ GAWR (Gross Axle Weight Rating) The maximum allowable gross Front GAWR axle weight. The gross axle weight is the load placed on each axle (front and rear). Rear GAWR ■ TWR (Trailer Weight Rating) The maximum allowable gross (With brakes) trailer weight.
Page 282 2-5. Driving information ■ Unbraked TWR (Unbraked Trailer Weight Rating) The trailer weight rating for tow- (Without brakes) ing a trailer without a trailer ser- vice brake system. ■ Tongue Weight The load placed on the trailer hitch ball. (P. 285)
Page 283 2-5. Driving information Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (P. 284) ● The gross combination weight must never exceed the GCWR described in the table. (P. 284) ● The gross vehicle weight must never exceed the GVWR indi- cated Certification...
Page 284 2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR and TWR Driving Model code Engine GCWR system 7400 lb.
Page 285 2-5. Driving information Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •...
Page 286 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 287 2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 288 2-5. Driving information Positions for towing hitch receiver Hitch receiver pin hole posi- tion: 46.2 in. (1172.3 mm) Connecting trailer lights Use the wire harness stored in the rear end under the vehicle body. 4 pin connector 4 pin, 7 pin connectors...
Page 289 2-5. Driving information ■ Service connector for towing brake controller (with towing package) Your vehicle is equipped with a service connector for the trailer brake controller as shown. Access the service connector. Remove the scuff plate. Remove the clip (screw type) and trim board.
Page 290 2-5. Driving information ● Disconnecting Set the height control of electronically modulated air suspen- sion system to N mode. Set the electronically modulated air suspension system to MAN. (manual). Turn off the engine. Set the supporting leg of the trailer on the ground and raise the hitch by 4 in.
Page 291: Tires
● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 292 2-5. Driving information ● Avoid jerky starts or sudden acceleration. ● Avoid jerky steering and sharp turns, and slow down before mak- ing a turn. ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a wider than normal turning radius.
Page 293 2-5. Driving information ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoid- able, do so only after performing the following: Apply the brakes and keep them applied.
Page 294: Tires
2-5. Driving information ■ Matching trailer ball height to trailer coupler height No matter which class of tow hitch applies, for a more safe trailer hookup, the trailer ball setup must be the proper height for the coupler on the trailer. Coupler Trailer ball ■...
Page 295: Tires
Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 296 2-5. Driving information If you cannot find any problems, the speed at which trailer swaying occurred is beyond the limit of your particular vehicle-trailer combination. Drive at a lower speed to prevent instability. Remember that swaying of the towing vehicle-trailer increases as speed increases. CAUTION ■...
Page 297 ■ When towing a trailer Toyota recommends trailers with brakes that conform to any applicable fed- eral and state/provincial regulations. ● If the gross trailer weight exceeds unbraked TWR, trailer brakes are required.
Page 298 NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights.
Page 299: Dinghy Towing
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground.
Page 300: Interior Features
Interior features 3-1. Using the air conditioning system and defogger Front air conditioning system ......302 Rear air conditioning system ......311 Rear window and outside rear view mirror defoggers .... 315 Windshield wiper de-icer ......317 3-2. Using the multimedia system Multimedia system types ......
Page 301 3-3. Using the interior lights 3-5. Other interior features Interior lights list ....404 Sun visors ......431 • Personal/interior light Vanity mirrors....432 main switch ....405 Clock ........ 433 • Personal/interior lights ... 406 Outside temperature • Interior light ....407 display......
Page 302: 3-1. Using The Air Conditioning System And Defogger
3-1. Using the air conditioning system and defogger Front air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Air outlet Windshield defogger selection dial Driver’s side temperature control dial Front passenger’s side temperature Air conditioning ON/OFF switch control dial Automatic mode...
Page 303 3-1. Using the air conditioning system and defogger Display Front passenger’s side Fan speed display Airflow display temperature setting display Temperature setting Driver’s side temperature display for rear passengers setting display Using the automatic mode Press The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting.
Page 304 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between individual and simultaneous modes each time is pressed. ●...
Page 305 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Turn the air outlet selection dial. The air outlets switch each time either side of air outlet selection dial is turned. Air flow as shown according to the mode selected. When the dial is set to , air flows to the upper body.
Page 306 3-1. Using the air conditioning system and defogger When the dial is set to , air flows to the feet. When the dial is set to , air flows to the feet and the wind- shield defogger operates. Recirculated air mode will auto- matically switch to outside air mode.
Page 307 3-1. Using the air conditioning system and defogger Defogging the windshield Press The indicator comes on. The air conditioning system con- trol operates automatically. Recirculated air mode will auto- matically switch to outside air mode. Adjusting the position and opening and closing the air outlets Driver side outlets Direct air flow to the left or right, up or down.
Page 308 3-1. Using the air conditioning system and defogger Passenger side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions.
Page 309 There may be a problem in the air conditioning system if the indi- cator continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. ■ Ventilation and air conditioning odors ●...
Page 310 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 311: Rear Air Conditioning System
3-1. Using the air conditioning system and defogger Rear air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Temperature setting Automatic mode Airflow control display Temperature control Fan speed control for rear passengers ■ Button lock function During Simultaneous mode (the indicator on is on), the rear air condi-...
Page 312 3-1. Using the air conditioning system and defogger Using the automatic mode Press The indicator comes on. The air conditioning system will operate, and air outlets and fan speed will be set automatically. Press to increase the temperature and decrease it. Adjusting the settings ■...
Page 313 3-1. Using the air conditioning system and defogger is pressed, air When flows to the upper body and feet. The indicator comes on. is pressed, air When flows to the feet. The indicator comes on. ■ Adjusting the fan speed (decrease ...
Page 314 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Roof side outlets Direct air flow to the left or right, up or down. NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
Page 315: Rear Window And Outside Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger  Rear window and outside rear view mirror defoggers These features are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors. On/off Press the button to turn on the rear window defogger.
Page 316 3-1. Using the air conditioning system and defogger CAUTION ■ When the outside rear view mirror defoggers are on (vehicles with out- side rear view mirror defoggers) Do not touch the rear view mirror surfaces, as they can become very hot and burn you.
Page 317: Windshield Wiper De-Icer
3-1. Using the air conditioning system and defogger  Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. On/off Press the button to turn on the windshield wiper de-icer. The indicator light will come on.
Page 318: 3-2. Using The Multimedia System
3-2. Using the multimedia system  Multimedia system types Entune Audio P. 320 Entune Audio Plus Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.  : If equipped...
Page 319 3-2. Using the multimedia system Entune Premium Audio Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
Page 320: Entune Audio
3-2. Using the multimedia system  Entune Audio Operations such as listening to audio, using the hands-free phone, confirming vehicle information and changing multimedia system set- tings are started by using the following buttons. Multimedia system operation buttons button ® Press this button to access the Bluetooth hands-free system.
Page 321 3-2. Using the multimedia system Operating the touch screen By touching the screen with your finger, you can control the Audio, hands-free system, etc. ■ Drag Touch the screen with your finger and move the screen to the desired position. ●...
Page 322 3-2. Using the multimedia system CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ●...
Page 323 3-2. Using the multimedia system NOTICE ■ To avoid damaging the touch screen ● To prevent damaging the screen, lightly touch the screen buttons with your finger. ● Do not use objects other than your finger to touch the screen. ●...
Page 324: Usb Port/Aux Port
3-2. Using the multimedia system USB port/AUX port Connect an iPod, USB memory device or portable audio player to the USB port/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the “Select Audio Source” screen and the device can be operated via multimedia system.
Page 325: Setup Menu
3-2. Using the multimedia system Setup menu You can adjust the multimedia system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. Select to adjust the settings for operation sounds, screen animation, etc. (P. 326) Select to adjust the settings for contrast and brightness of the screen.
Page 326 Select to delete personal data (P. 327) Select to update program ver- sions. For details, contact your Toyota dealer. Select to display the software information. Notices related to third party software used in this product are enlisted. (This...
Page 327 3-2. Using the multimedia system ■ Delete personal data Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. A confirmation screen will be displayed. Select “Yes”. The following personal data will be deleted or changed to its default settings.
Page 328 3-2. Using the multimedia system Display settings Settings are available for adjusting the contrast and brightness of the screen. ■ Screen for display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust general screen con- trast/brightness Adjust camera screen con- trast/brightness Changes to day mode.
Page 329: Basic Audio Operations
3-2. Using the multimedia system Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the multimedia system Press this button to eject a disc Insert a disc into the disc slot “Select Audio Source”...
Page 330 3-2. Using the multimedia system Selecting the audio source Press the “AUDIO” button. Select “Source” on the audio control screen or press the “AUDIO” button again. Select the desired audio source. ■ Reordering the audio source Select “Reorder”. Select the desired audio source then to reorder.
Page 331 3-2. Using the multimedia system List screen operation When a list style screen is displayed, use the appropriate buttons to scroll through the list. ■ How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display.
Page 332 3-2. Using the multimedia system ● Selecting a track/file/song from the track/file/song list Select “Browse” or cover art. Select the desired track/file/ song. When an MP3/WMA/AAC disc or USB memory device is being used, ® the folder can be selected. When a Bluetooth device or iPod is being used, the album can be selected.
Page 333 3-2. Using the multimedia system Sound settings On the “Sound Settings” screen, sound quality (Treble/Mid/Bass), volume balance can be adjusted. ■ Tone and balance Select “Sound” on the audio control screen to adjust the sound set- tings. Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5.
Page 334: Using The Radio
3-2. Using the multimedia system Using the radio Select “AM” or “FM” on the “Select Audio Source” screen to begin listening to the radio. Audio control screen “Select Audio Source” screen appears Preset stations Select to display RBDS text message Scanning for receivable sta- tion Select to display a list of...
Page 335 3-2. Using the multimedia system Setting station presets Search for desired stations by turning the “TUNE·SCROLL” knob or pressing the “TRACK” or “SEEK” button. Select “(add new)” To change the preset station to a different one, select and hold the preset station.
Page 336: Playing An Audio Cd And Mp3/Wma/Aac Discs
3-2. Using the multimedia system Playing an audio CD and MP3/WMA/AAC discs Insert disc or select “CD” on the “Select Audio Source” screen to begin listening to a CD. Audio control screen “Select Audio Source” screen appears Audio CD Displaying the track list ...
Page 337 ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures. If the problem is not rectified, take the vehicle to your Toyota dealer. Message Cause Correction procedures • The disc is dirty or •...
Page 338 3-2. Using the multimedia system ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. ■ MP3, WMA and AAC files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression.
Page 339 3-2. Using the multimedia system ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) ● Compatible media Media that can be used for MP3, WMA and AAC playback are CD-Rs and CD-RWs.
Page 340 3-2. Using the multimedia system ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 341 3-2. Using the multimedia system ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc.
Page 342 3-2. Using the multimedia system NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ●...
Page 343: Listening To An Ipod
3-2. Using the multimedia system Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the “Select Audio Source” screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.
Page 344 3-2. Using the multimedia system ■ About iPod ● “Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
Page 345 3-2. Using the multimedia system ■ iPod functions ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. ● Depending on the iPod that is connected to the system, certain functions may not be available.
Page 346 3-2. Using the multimedia system ■ Error messages Message Cause/Correction procedures “Connection error. Please consult your This indicates a problem in the iPod or its Owner’s Manual for connection. instructions on how to connect the iPod.” This indicates that there is no music data in “No music files found.”...
Page 347 3-2. Using the multimedia system ■ Compatible models ® ® ® ® ® The following iPod , iPod nano , iPod classic , iPod touch and iPhone devices can be used with this system. ● Made for • iPod touch (5th generation) •...
Page 348 3-2. Using the multimedia system NOTICE ■ To prevent damage to the iPod or its terminals ● Do not leave the iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected.
Page 349: Listening To A Usb Memory Device
3-2. Using the multimedia system Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Select “USB” on the “Select Audio Source” screen. Connecting a USB memory device P. 324 Audio control screen “Select Audio Source”...
Page 350 3-2. Using the multimedia system ■ USB memory functions ● Depending on the USB memory device that is connected to the system, the device itself may not be operable and certain functions may not be available. If the device is inoperable or a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and reconnecting it may resolve the problem.
Page 351 3-2. Using the multimedia system Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folders in a device: 3000 (including the root) • Maximum number of files in a device: 9999 •...
Page 352 3-2. Using the multimedia system ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.1/48 (kHz) • Compatible bit rates 16-320 (kbps) • Compatible channel modes: 1 ch and 2 ch ● File names The only files that can be recognized as MP3/WMA/AAC and played are those with the extension .mp3 or .wma.
Page 353 3-2. Using the multimedia system ● Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • There is a wide variety of freeware and other encoding software for MP3, WMA and AAC files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result.
Page 354: Using The Aux Port
3-2. Using the multimedia system Using the AUX port To use the AUX port, connect a portable player, then select “AUX” on the “Select Audio Source” screen. Connecting a portable audio player P. 324 ■ Operating portable audio players connected to the multimedia system The volume can be adjusted using the vehicle’s audio controls.
Page 355: Connecting Bluetooth
3-2. Using the multimedia system ® Connecting Bluetooth ® The following can be performed using Bluetooth wireless commu- nication: ■ A portable audio player can be operated and listened to via multimedia system ■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a ®...
Page 356 3-2. Using the multimedia system Device registration/connection flow ® 1. Register the Bluetooth device to be used with Multimedia system (P. 358, 359) ® 2. Connect the Bluetooth device to be used (P. 361) To be used for audio To be used for hands-free phone ®...
Page 357 3-2. Using the multimedia system Registering and connecting from the “Bluetooth Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth” on the “Setup” screen. Select to connect the device to be used with multimedia sys- tem.
Page 358 3-2. Using the multimedia system ® Registering a Bluetooth audio player for the first time ® To use the Bluetooth Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the ®...
Page 359 3-2. Using the multimedia system ® Registering a Bluetooth device ® Bluetooth compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 ® Bluetooth devices. ■ ® How to register a Bluetooth device Display the “Bluetooth Setup”...
Page 360 3-2. Using the multimedia system Select “OK” when the connection status changes from “Con- necting...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth Setup”...
Page 361 3-2. Using the multimedia system ® Connecting a Bluetooth device ® Up to 5 Bluetooth devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. Press the “SETUP”...
Page 362 3-2. Using the multimedia system ■ Manual connection When auto connection has failed or “Bluetooth Power” is turned ® off, you must connect the Bluetooth device manually. ® Follow the steps in “Connecting a Bluetooth device” from “STEP 1”. (P. 361) ■...
Page 363 3-2. Using the multimedia system ® Displaying a Bluetooth device details You can confirm and change the registered device details. ■ ® Bluetooth device registration status Display the “Bluetooth Setup” screen. (P. 357) Select the device. Select “Device Info”. Following screen is displayed: Device name Change connection method (P.
Page 364 3-2. Using the multimedia system ® Detailed Bluetooth system settings ® You can confirm and change the detailed Bluetooth settings. ■ ® How to check and change detailed Bluetooth settings Display the “Bluetooth Setup” screen. (P. 357) Select “System Settings”. The following screen is displayed: ®...
Page 365 For a list of specific devices which operation The connected device has been confirmed on may not be a compatible this system, check with ® Bluetooth cellular your Toyota dealer or the The hands-free phone. following website: system or Blue- http://www.toyota.com/ ® tooth device bluetooth does not work.
Page 366 3-2. Using the multimedia system When registering/connecting a cellular phone Symptom Likely cause Solution An incorrect passcode Enter the correct pass- was entered on the cellu- code on the cellular lar phone. phone. Complete the registra- The registration opera- tion operation on the cel- tion has not been com- lular phone (approve pleted on the cellular...
Page 367 For a list of specific devices which operation The profile version of the has been confirmed on connected cellular phone this system, check with may not be compatible your Toyota dealer or the with transferring contact following website: data. http://www.toyota.com/ bluetooth Contact data...
Page 368 3-2. Using the multimedia system ® When using the Bluetooth message function Symptom Likely cause Solution Enable message trans- Message transfer is not fer on the cellular phone enabled on the cellular (approve message trans- phone. Messages can- fer on the phone). not be viewed.
Page 369 3-2. Using the multimedia system In other situations Symptom Likely cause Solution The cellular phone is not Bring the cellular phone close enough to this sys- closer to this system. tem. • Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular Even though all...
Page 370 3-2. Using the multimedia system ® Bluetooth ■ ® About Bluetooth ® The Bluetooth word mark and logos are registered trademarks owned Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
Page 371 3-2. Using the multimedia system ■ Conditions under which the system will not operate ® ● If using a cellular phone that does not support Bluetooth ● If the cellular phone is turned off ● If you are outside of cellular phone service coverage ●...
Page 372 3-2. Using the multimedia system ■ About the contact in this system The following data is stored for every registered cellular phone. When another phone is connecting, you cannot read the registered data. ● Contact data ● Call history ● Favorite ●...
Page 373 3-2. Using the multimedia system ● Profiles: • HFP (Hands Free Profile) Ver. 1.0 or higher (Recommended: Ver. 1.6 or higher) This is a profile to allow hands-free phone calls using a cellular phone or head set. It has outgoing and incoming call functions. •...
Page 374 3-2. Using the multimedia system For vehicles sold in Canada IC: 216J-YEAP01A446 This device complies with Industry Canada licence-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interfer- ence, including interference that may cause undesired operation of the device.
Page 375 3-2. Using the multimedia system ■ Reconnecting the portable audio player If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position, the system automatically reconnects the portable audio player. If you have switched off the portable audio player yourself, follow the instruc- tions below to reconnect: ●...
Page 376 3-2. Using the multimedia system CAUTION ■ Caution regarding interference with electronic devices ● ® Your audio unit is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable dis- ®...
Page 377: Listening To Bluetooth ® Audio
3-2. Using the multimedia system ® Listening to Bluetooth audio ® The Bluetooth audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wireless communication. Select “ Audio” on the “Select Audio Source” screen. ®...
Page 378: Using A Bluetooth Phone
3-2. Using the multimedia system ® Using a Bluetooth phone The hands-free system is a function that allows you to use your cel- lular phone without touching it. ® ® This system supports Bluetooth . Bluetooth is a wireless data sys- tem that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls.
Page 379 3-2. Using the multimedia system ■ Microphone The vehicle’s built in microphone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. ® To use the hands-free system, you must register your Bluetooth phone in the system.
Page 380 3-2. Using the multimedia system Making a call ® Once a Bluetooth phone is registered, you can make a call using the following procedure: ■ Dialing Display the phone screen. (P. 378) Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select For the first digit, you can enter “+”...
Page 381 3-2. Using the multimedia system ■ When the contact is empty ® You can transfer the phone numbers in a Bluetooth phone to the system. Operation methods differ between PBAP (Phone Book Access ® Profile) compatible and PBAP incompatible Bluetooth phones.
Page 382 3-2. Using the multimedia system ® ● For PBAP incompatible but OPP compatible Bluetooth phones Select the “Contacts” tab. Follow the steps in “Update contacts from phone” from “STEP2”. (P. 395) ■ Calling using favorites list You can make a call using numbers registered in the contact. Display the phone screen.
Page 383 3-2. Using the multimedia system ■ Dialing from call history You can make a call using the call history, which has the 3 func- tions below. : calls which you missed : calls which you received : calls which you made Display the phone screen.
Page 384 3-2. Using the multimedia system Receiving a call When a call is received, the following screen is displayed together with a sound. ■ To answer the phone Select ■ To refuse a call Select ■ To adjust the incoming call volume Turn the “PWR·VOL”...
Page 385 3-2. Using the multimedia system Speaking on the phone The following screen is displayed when speaking on the phone. ■ To adjust the call volume Select “-” or “+”. You can also adjust the volume using the volume knob. ■ To prevent the other party from hearing your voice Select “Mute”.
Page 386 3-2. Using the multimedia system ■ Release Tones ● A continuous tone signal is a character string that consists of numbers and the characters “p” or “w”. (e.g.056133w0123p#1) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed.
Page 387 3-2. Using the multimedia system ■ Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party, select To refuse the call, select Every time you select during call waiting, you will be switched to the other party.
Page 388 3-2. Using the multimedia system ® Bluetooth phone message function Received messages can be forwarded from the connected ® Bluetooth phone, enabling checking and replying using the multime- dia system. ® Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox.
Page 389 3-2. Using the multimedia system ■ Receiving a message ● Depending on the cellular phone used for receiving messages, or its reg- istration status with the navigation system, some information may not be displayed. ● The pop up screen is separately available for incoming e-mail and SMS/ MMS messages under the following conditions: E-mail: •...
Page 390 3-2. Using the multimedia system ■ Check the messages ● ® Depending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone. ● ® Messages are displayed in the appropriate connected Bluetooth phone’s registered mail address folder.
Page 391 3-2. Using the multimedia system ■ Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender’s phone number. Display the “Message Inbox” screen. (P. 388) Select the desired message. Select Check that the “Call” screen is displayed. ●...
Page 392 3-2. Using the multimedia system ® Bluetooth phone settings You can adjust the hands-free system to your desired settings. ■ “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. Set the phone connection (P.
Page 393 3-2. Using the multimedia system ■ To return to the default settings Select “Default”, and then “Yes”.
Page 394 3-2. Using the multimedia system Contact/Call history settings ® The contact can be transferred from a Bluetooth phone to the sys- tem. The contact also can be added, edited and deleted. The call history can be deleted and contact and favorites can be changed.
Page 395 3-2. Using the multimedia system Select to delete contacts from the contact list. (P. 398) Select reset setup items. ® : For PBAP compatible Bluetooth phones only, this function is avail- able when “Automatic Contact/ History Transfer” is set to off. (P.
Page 396 3-2. Using the multimedia system ® ● For PBAP Incompatible Bluetooth Phones Select “Update Contacts from Phone”. ® Transfer the contact data to the system using a Bluetooth phone. This operation may be unnecessary depending on the type of cellu- lar phone.
Page 397 3-2. Using the multimedia system ■ Registering a new contact to the contact list New contact data can be registered. Up to 4 numbers per person ® can be registered. For PBAP compatible Bluetooth phones, this function is available when “Automatic Contact/History Transfer” is set to off.
Page 398 3-2. Using the multimedia system ● Editing the contacts in a different way (From the “Contact Details” screen) Display the phone screen. (P. 378) Select the “Contacts”, “Call history” tab or the “Favorites” tab and select the desired contact. Select “Edit Contact”. “E-mail Addresses”: Select to display all registered e-mail addresses for the contact.
Page 399 3-2. Using the multimedia system ■ Favorites list setting Up to 15 contacts (maximum of 4 numbers per contact) can be reg- istered in the favorites list. ● Registering the contacts in the favorites list Select “Add Favorite”. Select the desired contact to add to the favorites list. Dimmed contacts are already stored as a favorite.
Page 400 3-2. Using the multimedia system Registering contacts in the favorites list in a different way (from the “Contact Details” screen) Display the phone screen. (P. 378) Select the “Contacts” tab or the “Call History” tab and select the desired contact. Select “Add Favorite”.
Page 401 3-2. Using the multimedia system ■ Message Settings Display the “Phone/Message Settings” screen. (P. 392) Select “Messaging Settings”. Select the desired item to be set. Set automatic message trans- fer on/off. Set automatic message read- out on/off. Set the SMS/MMS notification popup on/off.
Page 402 3-2. Using the multimedia system Change the incoming e-mail display. “Full Screen”: When an e-mail is received, the incoming e-mail dis- play screen is the displayed and can be operated on the screen. “Drop-Down”: When an e-mail is received, a message is displayed on the upper side of the screen.
Page 403 3-2. Using the multimedia system ■ Phone Display Settings Display the “Phone/Message Settings” screen. (P. 392) Select “Phone Display Settings”. Select the desired item to be set. Change the incoming call dis- play. “Full Screen”: When a call is received, the hands-free screen is displayed and can be operated on the screen.
Page 404: 3-3. Using The Interior Lights
3-3. Using the interior lights Interior lights list Your Toyota is equipped with an illuminated entry system to assist in entering the vehicle. Due to the function of the system, the lights shown in the following illustration automatically turn on/off accord- ing to whether the doors are locked/unlocked, whether the doors are opened/closed, and the engine switch position.
Page 405: Personal/Interior Light Main Switch
20 minutes. ■ Customization ● That can be configured at Toyota dealer (vehicles without multi-informa- tion display) Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features P. 627) ●...
Page 406: Personal/Interior Lights
3-3. Using the interior lights Personal/interior lights Personal/interior lights ■ Front Type A On/off Type B On/off ■ Center Type A On/off...
Page 407: Interior Light
3-3. Using the interior lights Personal/interior lights and interior light Type B On/off ■ Rear On/off Interior light DOOR position The interior light comes on when a back door is opened. It turns off when the door is closed.
Page 408: 3-4. Using The Storage Features
3-4. Using the storage features List of storage features Overhead console Glove boxes Auxiliary boxes Bottle holders Cup holders Rear console box (if equipped) Cup holder (if equipped) Front console box • Card holder • Map holder • Pen holder •...
Page 409: Glove Boxes
3-4. Using the storage features Glove boxes CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may result in the following when cabin temperature becomes high: ●...
Page 410: Coin Holder
3-4. Using the storage features Glove boxes and coin holder Pull the lever up. ■ Glove box light The glove box light turns on when the tail lights are on. CAUTION ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Page 411: Front Console Box
3-4. Using the storage features Coin holder and front console box CAUTION ■ Caution while driving Keep the coin holder closed. Injuries may result in the event of an accident or sudden braking. Front console box Pull the knob up and lift the lid.
Page 412 3-4. Using the storage features Front console box ■ When using the front console box lid as an armrest Pull the knob up and slide the lid forward. If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid.
Page 413 3-4. Using the storage features Front console box The box can be removed. Hanging file folders can be hung on the rails when the box is removed. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 414: Card Holder
3-4. Using the storage features Card holder Card holder Pull the knob up and lift the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 415: Map Holder
3-4. Using the storage features Map holder Map holder Center console Push the tab down to release the lock. Remove the lid. Stow the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 416 3-4. Using the storage features Map holder Front console box Pull the knob up and lift the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 417: Pen Holder
3-4. Using the storage features Pen holder Pen holder Pull the knob up and lift the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 418: Tissue Pocket
3-4. Using the storage features Tissue pocket Tissue pocket Pull the knob up and lift the lid. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 419: Rear Console Box
3-4. Using the storage features Rear console box Rear console box (if equipped) Upper box Push the knob and lift the lid. Lower box Pull the knob up and lift the upper box.
Page 420 3-4. Using the storage features Rear console box ■ The separator can be used at either of two positions shown in the illus- tration Change the separator position. ■ The separator can be stowed Stow the separator to the lid. ■...
Page 421 3-4. Using the storage features Rear console box ■ The inside tray can be removed Pull the tray up. ■ When closing the rear console box lid Close the rear console box by lifting the grip on the inside of the upper box.
Page 422: Overhead Console
3-4. Using the storage features Rear console box and overhead console CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. ■ When opening/closing the lower box Be careful not to get your hands or feet caught between the lower box and the upper box.
Page 423 3-4. Using the storage features Overhead console Type B Push the knob forward to open the console. CAUTION ■ Caution while driving Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.
Page 424: Cup Holders
3-4. Using the storage features Cup holders Cup holders Front Front console box Pull the lid down. Rear...
Page 425 3-4. Using the storage features Cup holders Rear console box (if equipped) Attach the separator when using either console box as a cup holder. Both cup holders cannot be used at the same time. ■ Removing the cup holder (front) Push the tab down to release the lock.
Page 426 3-4. Using the storage features Cup holders Pull the cup holder up. ■ Removing the separator (rear console box) Inside Pull the separator up. Outside Pull the separator up.
Page 427 3-4. Using the storage features Cup holders ■ The position of the separator can be changed (rear console box) Inside Change the separator position. Outside Change the separator position. ■ The separator can be adjusted (rear console box) Adjust the separator.
Page 428: Bottle Holders
3-4. Using the storage features Cup holders and bottle holders CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 429: Auxiliary Boxes
3-4. Using the storage features Bottle holders and auxiliary boxes Rear NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Page 430 3-4. Using the storage features Auxiliary boxes Rear Pull the lid up. Rear console box (if equipped) Pull the lever up to release the lock. Pull the handle. CAUTION ■ Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
Page 431: 3-5. Other Interior Features
3-5. Other interior features Sun visors ■ Main visor Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards. ■ Sub visor (if equipped) Flip down.
Page 432: Vanity Mirrors
3-5. Other interior features Vanity mirrors Vehicles without vanity light Open the cover. Vehicles with vanity light Open the cover. The light turns on when the cover is opened. Adjust the brightness of the light.
Page 433: Clock
3-5. Other interior features Clock Adjusts the hours. Adjusts the minutes. ■ For quicker adjustment of the clock Hold down the M or H button continuously. This allows faster advancement of the minutes and hours. ■ The clock is displayed when The engine switch is in the ACC or ON position.
Page 434: Outside Temperature Display
3-5. Other interior features Outside temperature display Displays the outside air temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). Switches the outside air temperature display between °C (Celsius) and °F (Fahrenheit). equipped) Vehicles without multi-informa- tion display: Push the SETUP button until the desired unit of measure-...
Page 435 3-5. Other interior features ■ When – –°C or – –°F is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ The outside air temperature is displayed when The engine switch is in the ON position.
Page 436: Portable Ashtray
3-5. Other interior features Portable ashtray The ashtray can be installed in a cup holder. ■ The ashtray can be removed Pull the ashtray up. CAUTION ■ When not in use Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.
Page 437: Cigarette Lighter
3-5. Other interior features Cigarette lighter Push the cigarette lighter. The cigarette lighter will pop up when it is ready for use. ■ The cigarette lighter can be used when The engine switch is in the ACC or ON position. CAUTION ■...
Page 438: Conversation Mirror
3-5. Other interior features Conversation mirror Push the lid. The mirror can be adjusted by pushing the mirror edge. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 439: Power Outlets
3-5. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 120 V AC: Accessories that use less than 100 W. Instrument panel (12 V)
Page 440 3-5. Other interior features Inside the front console box (12 V) Pull the knob up to release the lock. Lift the lid. Back of the front console box (12 V) : Vehicles without rear seat entertainment system...
Page 441 3-5. Other interior features Back of the front console box (120 V AC) Power outlet socket Luggage compartment (12 V) : Vehicles with rear seat entertainment system ■ The power outlet can be used when 12 V The engine switch is in the ACC or ON position. 120 V AC The engine switch is in the ON position.
Page 442 Do not modify, disassemble or repair the power outlet or its inverter, in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs. ■...
Page 443 3-5. Other interior features NOTICE ■ To avoid damaging the power outlet and the plug ● Close the power outlet lid when not in use. ● Foreign objects or liquids that enter the power outlet may cause a short circuit. ●...
Page 444 If the power outlet is loose when an electrical appliance plug is con- nected Replace the outlet. Contact a Toyota dealer for any necessary replacements. ■ If the power outlet gets dirty Turn the main switch off and use a soft, clean cloth to wipe it gently.
Page 445: Seat Heaters
3-5. Other interior features  Seat heaters ■ Front seat The indicator comes on. Adjusts the seat tempera- ture. The further you turn the dial upward, the warmer the seat becomes.  : If equipped...
Page 446 3-5. Other interior features ■ Rear seat (vehicles with rear console box) Press the LO or HI switch to warm the seats to a low or high temperature respectively. High temperature The indicator (yellow) comes Low temperature The indicator (green) comes ■...
Page 447 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 448: Seat Heaters And Ventilators
3-5. Other interior features  Seat heaters and ventilators Blows air from the seats The indicator comes on. The higher the number, the stron- ger the airflow becomes. Heats the seats The indicator comes on. The higher the number, the warmer the seats become.
Page 449 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 450: Armrests
3-5. Other interior features  Armrests Separated seat Adjusting to the desired angle: Lower the armrest from the highest position to the lowest position. Raise the armrest to the desired angle. Unlock the armrest: Lift the armrest to raise it to the highest position.
Page 451: Rear Side Sunshades
3-5. Other interior features  Rear side sunshades Rear door window Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly.  : If equipped...
Page 452 3-5. Other interior features Rear quarter window Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly. NOTICE ■ To ensure normal operation of the sunshade Observe the following precautions.
Page 453: Assist Grips
3-5. Other interior features Assist grips An assist grip (type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Page 454: Floor Mat
3-5. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eye- lets.
Page 455 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 456: Luggage Compartment Features
3-5. Other interior features Luggage compartment features ■ Tie-down hooks Tie-down hooks are provided for securing loose items.
Page 457 3-5. Other interior features ■ Cargo net hooks To hang the cargo net, use the cargo net hooks. The cargo net itself is not included as original equipment.
Page 458 3-5. Other interior features ■ Shopping bag hooks To hang shopping bags, use the shopping bag hooks.
Page 459 3-5. Other interior features ■ Auxiliary boxes Type A Pull the lever upwards to lift the deck board. Type B (if equipped) Open the cover.
Page 460 3-5. Other interior features CAUTION ■ When the tie-down hooks are not in use To avoid injury, always return the tie-down hooks to their retracted positions when they are not in use. ■ Caution while driving Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking.
Page 461: Garage Door Opener
3-5. Other interior features  Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 462 3-5. Other interior features Press and hold down one of the ® buttons on the HomeLink the button on the transmitter. When indicator ® HomeLink changes from a slow to a rapid flash, you can release both buttons. ® If the HomeLink indicator comes on but does not flash, or flashes rapidly for 2 seconds and remains...
Page 463 3-5. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. Locate the training button on the ceiling mounted garage door opener motor.
Page 464 ® the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. ■ Reprogramming a button ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 465 3-5. Other interior features ® Erasing the entire HomeLink memory (all three programs) Press and hold down the 2 out- side buttons for 10 seconds until the indicator flashes. If you sell your vehicle, be sure to erase the programs stored in the ®...
Page 466 3-5. Other interior features ■ When support is necessary Visit on the web at www.homelink.com or call 1-800-355-3515. CAUTION ■ When programming a garage door or other remote control device The garage door may operate, so ensure that people and objects are out of danger to prevent potential harm.
Page 467: Compass
3-5. Other interior features  Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press the switch. ■ Displays and directions Display Direction North Northeast...
Page 468 3-5. Other interior features Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
Page 469 3-5. Other interior features ■ Deviation calibration Stop the vehicle where it is safe to drive in a circle. Press the switch until a number (1 to 15) appears on the com- pass display. Press the switch, and referring to the map above, select the number of the zone where you are.
Page 470 3-5. Other interior features ■ Conditions unfavorable to correct operation The compass may not show the correct direction in the following conditions: ● The vehicle is stopped immediately after turning. ● The vehicle is on an inclined surface. ● The vehicle is in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).
Page 471: Maintenance And Care
Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior..472 Cleaning and protecting the vehicle interior..474 4-2. Maintenance Maintenance requirements ....477 General maintenance..480 Emission inspection and maintenance (I/M) programs ......483 4-3. Do-it-yourself maintenance Do-it-yourself service precautions ....
Page 472: Cleaning And Protecting The Vehicle Exterior
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 473 ■ Precaution regarding the Blind Spot Monitor If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. NOTICE ■ To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.)
Page 474: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 475 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 476 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ●...
Page 477: 4-2. Maintenance
■ Repair and replacement It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 478 Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE” appears on the multi-information display. ■ Allow inspection and repairs to be performed by a Toyota dealer ● Toyota technicians are well-trained specialists and are kept up to date with the latest service information.
Page 479 4-2. Maintenance CAUTION ■ Warning in handling of battery ● Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
Page 480: General Maintenance
“Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 481 4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 482 4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tire •...
Page 483: Emission Inspection And Maintenance (I/M) Programs
If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. ■...
Page 484: 4-3. Do-It-Yourself Maintenance
• FMVSS No.116 DOT 3 or SAE Brake fluid level (P. 496) J1703 brake fluid • Rag or paper towel • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 485 4-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and watt- age rating as original Light bulbs (P. 535) • Phillips-head screwdriver • Flathead screwdriver • Automatic transmission fluid ® DEXRON II or III Power steering fluid level •...
Page 486 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 487 4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. ■ If the brake fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the brake fluid level in the accumulator is high.
Page 488: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the hood catch lever and lift the hood. CAUTION ■...
Page 489: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (P. 502) Brake fluid reservoir (P. 496) Engine oil level dipstick (P. 490) Fuse box (P. 523) Engine coolant reservoir Battery (P. 499) (P. 494) Radiator (P. 496) Engine oil filler cap Cooling fans (P.
Page 490 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After turning off the engine, wait more than 5 minutes for the oil to drain back into the bot- tom of the engine.
Page 491 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 492 4-3. Do-it-yourself maintenance ■ Engine oil consumption A certain amount of engine oil will be consumed while driving. In the follow- ing situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. ●...
Page 493 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 494 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. ■...
Page 495 4-3. Do-it-yourself maintenance CAUTION ■ When the engine is hot Do not remove the radiator cap. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. NOTICE ■...
Page 496 Radiator and condenser Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■...
Page 497 4-3. Do-it-yourself maintenance CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately.
Page 498 4-3. Do-it-yourself maintenance Power steering fluid ■ Fluid level The fluid level should be within the appropriate range. Full (when cold) Add fluid (when cold) Full (when hot) Add fluid (when hot) Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures.
Page 499 4-3. Do-it-yourself maintenance CAUTION ■ Checking the fluid level Take care, as the reservoir may be hot. NOTICE ■ When adding fluid Avoid overfilling, or the power steering may be damaged. ■ After replacing the reservoir cap Check the steering box case, vane pump and hose connections for leaks or damage.
Page 500 4-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to discon- nect the ground cable. ● Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
Page 501 4-3. Do-it-yourself maintenance CAUTION ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 502 4-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations. ● The washer does not work. ● The low washer fluid warning light comes on. (vehicles without multi-information display) ● The warning message appears on the multi-information display. (vehicles with multi-information display) Open the lid.
Page 503 4-3. Do-it-yourself maintenance CAUTION ■ When refilling the washer fluid Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE ■...
Page 504: Tires
■ The tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (P. 560)
Page 505 ID codes must be regis- tered in the tire pressure warning computer and tire pressure warning system must be initialized. Have tire pressure warning valve and trans- mitter ID codes registered by your Toyota dealer. (P. 506) Initializing the tire pressure warning system ■...
Page 506 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer.
Page 507 4-3. Do-it-yourself maintenance ■ Replacing tires and wheels If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly. After driving for about 20 minutes, the tire pressure warning light comes on after blinking for 1 minute to indicate a system malfunction.
Page 508 Initialization can be completed in several minutes. However, in the fol- lowing cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. ●...
Page 509 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 510 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 511: Tire Inflation Pressure
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (P. 616)
Page 512 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the graduations of the gauge. If the tire inflation pressure is not within the recommended levels, adjust inflate the tire.
Page 513 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 514 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 515: Wheels
● Bent wheels that have been straightened ■ Wheel precautions ● Use only Toyota wheel nuts and wrench designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 100 miles (160 km).
Page 516 ■ When replacing wheels The wheels of your Toyota are equipped with tire pressure warning valves and transmitters (except for spare tire) that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
Page 517 Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 518: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Replacement method Turn the engine switch off. Open the glove box. Remove the internal tray. Remove the inside cover by sliding up while pulling toward you.
Page 519 4-3. Do-it-yourself maintenance Remove the filter cover. Pull the filter out of the filter outlet. Remove the air conditioning filter and replace it with a new one. The“UP” marks shown on the filter should be pointing up.
Page 520 4-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.) ■...
Page 521: Wireless Remote Control Battery
4-3. Do-it-yourself maintenance Wireless remote control battery Replace the battery with a new one if it is discharged. ■ You will need the following items: Lithium battery CR2032 ■ Replacing the battery Remove the cover using a coin protected with tape etc. Remove the discharged trans- mitter battery.
Page 522 ● The operational range is reduced. ■ Use a CR2032 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer. ●...
Page 523: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the engine switch off. The fuses are located in the following places. To check the fuses, follow the instructions below.
Page 524 4-3. Do-it-yourself maintenance Remove the fuse with the pull- out tool.
Page 525 Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Toyota dealer.
Page 526 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit Multiport fuel injection system/ 15 A sequential multiport fuel injection system HORN 10 A Horn Multiport fuel injection system/ EFI NO.1 25 A sequential multiport fuel injection system IG2 MAIN 30 A...
Page 527 4-3. Do-it-yourself maintenance Fuse Ampere Circuit POWER NO.4 25 A Power windows 15 A Front fog lights Stop lights, high mounted stop- light, vehicle stability control sys- tem, anti-lock brake system, shift STOP 15 A lock system, multiport fuel injection system/sequential multiport fuel injection system, towing converter TOW BRK...
Page 528 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiplex communication system, Multiport fuel injection system/ sequential multiport fuel injection system, auto anti-glare inside rear ECU-B1 7.5 A view mirror, power front driver’s seat, power tilt and power tele- scopic, power back door, gateway Interior lights, personal lights, van- ity lights, engine switch light, foot DOME...
Page 529 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Electronically modulated air sus- AIR SUS NO.2 7.5 A pension system SPARE Spare fuse SPARE 15 A Spare fuse SPARE 30 A Spare fuse Electronically modulated air sus- AIR SUS 50 A pension system 30 A Power back door RR HTR...
Page 530 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ A/PUMP NO.2 50 A sequential multiport fuel injection system HEAD LL, HEAD RL, MAIN 40 A HEAD LH, HEAD RH fuses : Replace the fuse with one of the same ampere rating as the original.
Page 531 4-3. Do-it-yourself maintenance ■ Under the instrument panel Fuse Ampere Circuit INVERTER 15 A Power outlet (120 V) FR P/SEAT LH 30 A Power front driver’s seat DR/LCK 25 A Multiplex communication system POWER No.5 30 A Power back door 7.5 A On-board diagnosis system PWR OUTLET...
Page 532 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Anti-lock brake system, vehicle sta- bility control system, multiplex com- munication system, intuitive parking assist system, power front driver’s seat, power tilt and power ECU-IG No.1 7.5 A telescopic, shift lock, tire pressure warning system, accessory meter, trailer towing, power outlet, electric moon roof, power back door, head light cleaner, Blind Spot Monitor...
Page 533 (P. 535) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. ■ If there is an overload in the circuits The fuses are designed to blow, protecting the wiring harness from damage.
Page 534 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. ●...
Page 535: Light Bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 536 4-3. Do-it-yourself maintenance ■ Rear bulb locations Stop/tail and rear side marker lights Tail lights License plate lights Rear turn signal lights Back-up lights Replacing light bulbs ■ Headlight high beam Unplug connector while depressing the lock release.
Page 537 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. ■ Headlight low beam Unplug connector while depressing the lock release. Turn the bulb base counterclock- wise.
Page 538 4-3. Do-it-yourself maintenance ■ Front turn signal/parking lights and daytime running lights (if equipped) Turn the bulb base counterclock- wise. Remove the light bulb.
Page 539 4-3. Do-it-yourself maintenance ■ Front side marker lights Remove the fender liner clip. Partly remove the fender liner and turn the bulb base counter- clockwise.
Page 540 4-3. Do-it-yourself maintenance Remove the light bulb. ■ Front fog lights (if equipped) Remove the bolts and partly remove the fender liner. Unplug connector while depressing the lock release. Turn the bulb counterclockwise.
Page 541 4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker lights, rear turn signal lights Right side Open the back door and remove the cover. To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations.
Page 542 4-3. Do-it-yourself maintenance Left side (vehicles with speaker in the luggage) Open the back door and remove the cover. To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations. Turn the bulb bases counter- clockwise.
Page 543 4-3. Do-it-yourself maintenance Tail lights, back-up lights Remove the covers. (vehicles with power back door only) To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations. Remove the nuts. Remove the rear combination light assembly in the order shown in the illustration.
Page 544 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. Tail light Back-up light Remove the light bulb. Tail light Back-up light ■ License plate lights Remove the screws and light unit.
Page 545 LED high mounted stoplight and side turn signal light The high mounted stoplight and side turn signal light consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 546 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb.
Page 547: When Trouble Arises
When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers ..548 If a warning light turns on If your vehicle needs to or a warning buzzer be towed ......549 sounds......557 If you think something is If a warning message is wrong ......
Page 548: 5-1. Essential Information
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
Page 549: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 550 5-1. Essential information Type B Towing eyelet ■ Emergency towing procedure The engine switch must be in the ACC (engine off) or the ON (engine running) position. 4WD models: Put the front wheel drive control switch in 2WD. Put the shift lever in N. Release the parking brake.
Page 551 5-1. Essential information NOTICE ■ To prevent causing serious damage to the transmission Never tow this vehicle from the rear with the four wheels on the ground. This may cause serious damage to the transmission. ■ Emergency towing eyelet precautions ●...
Page 552 5-1. Essential information Towing with a wheel lift-type truck from the front Use a towing dolly under the rear wheels. NOTICE ■ To prevent causing serious damage to the transmission Never tow this vehicle wheels on the ground. Towing with a wheel lift-type truck from the rear 2WD models Turn the engine switch to the ACC position.
Page 553 5-1. Essential information 4WD models When not using a towing dolly, turn the engine switch to the ACC position, shift the shift lever to N and put the front wheel drive control switch in 2WD. NOTICE ■ To prevent damaging the vehicle ●...
Page 554 5-1. Essential information Using a flat bed truck If your Toyota is transported by a Front flat bed truck, it should be tied down at the locations shown in the illustration. Vehicles without electronically modulated air suspension If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45.
Page 555: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 556: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 557: Steps To Take In An Emergency If A Warning Light Turns On Or A Warning Buzzer Sounds
Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging sys-...
Page 558 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: •...
Page 559 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light (warning buzzer) Check that all doors are Indicates that a door or closed.
Page 560 If the light does not go off, contact your Toyota dealer. When the light flashes: Have the system Indicates a malfunction in checked by your Toyota the automatic transmis- dealer. sion system. Tire pressure warning light When the light comes on:...
Page 561 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Low fuel level warning light Refuel the vehicle. Low level of fuel. Low washer fluid warn- ing light Fill the tank. Low level of washer fluid. Maintenance required reminder light Indicates that mainte- nance is required accord-...
Page 562 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Master warning light A buzzer sounds and the warning light comes on P. 568 and flashes to indicate that the master warning system has detected a malfunction. : Open door warning buzzer: The buzzer sounds to indicate that any door is opened (with the vehicle hav- ing reached a speed of 3 mph [5 km/h])
Page 563 Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. ■...
Page 564 If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. ● If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) ●...
Page 565 ON position, have it checked by your Toyota dealer. ■ Customization that can be configured at Toyota dealer The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features P. 627) CAUTION ■...
Page 566 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tire Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 567 5-2. Steps to take in an emergency CAUTION TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly.
Page 568: If A Warning Message Is Displayed (Vehicles With Multi-Information Display)
Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details Indicates that the engine coolant temperature is too high A buzzer also sounds.
Page 569 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning message goes off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed.
Page 570 If the light goes off, temperature is too high you may start the A buzzer also sounds. vehicle again. If the light does not go off, contact your Toyota dealer. Indicates a malfunction Have the system in the automatic trans- checked by your Toy- mission system ota dealer.
Page 571 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that all mainte- nance according to the driven distance on the maintenance schedule should be performed If necessary, perform soon. maintenance. Comes on approximately 4500 miles (7200 km) after (U.S.A.
Page 572 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the laser radar sensor is dirty or Clean the sensor. covered with ice. (if equipped) A buzzer also sounds. Indicates that the dynamic laser cruise If the windshield wipers control system is unable are on, turn them off or to judge vehicle-to-vehi-...
Page 573 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the Blind Spot Monitor sensor is Clean the sensor. dirty or covered with ice. A buzzer also sounds. Indicates that the Blind (if equipped) Spot Monitor sensor has Wait for sensor to cool been exposed to very down or warm up.
Page 574: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ●...
Page 575 5-2. Steps to take in an emergency Taking out the jack and tool bag Pull the deck board up. Remove the cover and loosen the strap. Remove the tools. Tighten Loosen...
Page 576 5-2. Steps to take in an emergency Taking out the spare tire Assemble the jack handle exten- sion as shown. Remove the cover. Insert the end of the jack handle extension into lowering screw and turn it counterclock- wise. After the tire is lowered com- pletely to the ground, remove the holding bracket.
Page 577 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. Wheel Flat tire chock positions Behind the Left- rear right- hand hand side side tire Front Behind the Right- rear left- hand hand side side tire In front of Left- the front...
Page 578 5-2. Steps to take in an emergency Position the jack at the correct jack point as shown. Front Rear Front Make sure the jack is positioned on a level and solid place. Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire.
Page 579 5-2. Steps to take in an emergency Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Tighten the nuts until the tapered Tapered portion portion comes into loose contact with the disc wheel. Disc wheel Lower the vehicle.
Page 580 5-2. Steps to take in an emergency CAUTION ■ Stowing the flat tire Failure to follow steps listed under stowing the tire may result in damage to the spare tire carrier and loss of the tire, which could result in serious injury or death.
Page 581 5-2. Steps to take in an emergency Confirm that the tire is not loose after tightening: Push and pull the tire Try rotating Visually check to ensure the tire is not hung on surrounding parts. If looseness or misassembly exists, repeat step 2 and step 3. Repeat step 3 any time the tire is lowered or disturbed.
Page 582 5-2. Steps to take in an emergency CAUTION ■ Using the jack handle Insert the square head securely until you hear a click to prevent the extension parts from coming apart unexpectedly. ■ Replacing a flat tire Observe the following precautions to reduce the risk of death or serious injury.
Page 583 5-2. Steps to take in an emergency CAUTION ■ Speed limit when using the temporary spare tire Do not drive at speeds in excess of 50 mph (80 km/h) when a temporary spare tire is installed on the vehicle. The temporary spare tire is not designed for driving at high speeds. Fail- ing to observe this precaution may lead to an accident causing death or serious injury.
Page 584 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
Page 585: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (P. 156) or releasing the steering lock (P. 157), confirm the following points. ■ The engine will not start even when the starter motor oper- ates normally.
Page 586 One of the following may be the cause of the problem. ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (P. 589) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 587: If The Shift Lever Cannot Be Shifted From P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 588: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine Toyota keys can be made by your Toyota dealer using one of the master keys and the key number stamped on your key number plate. (P. 30) ■...
Page 589: If The Vehicle Battery Is Discharged
You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. Connect the jumper cables.
Page 590 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
Page 591 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 592: If Your Vehicle Overheats
(radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact your Toyota dealer. The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir.
Page 593 If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer. CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ●...
Page 594 5-2. Steps to take in an emergency NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine. ■...
Page 595: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and put the shift lever in P.
Page 596: If Your Vehicle Has To Be Stopped In An Emergency
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly depress it.
Page 597 5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 598 5-2. Steps to take in an emergency...
Page 599: Vehicle Specifications
Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.) ..600 Fuel information ....611 Tire information ....616 6-2. Customization Customizable features ..627 Items to initialize ....631...
Page 600: Specifications Maintenance Data (Fuel, Oil Level, Etc.)
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Overall length 205.1 in. (5210 mm) Overall width 79.9 in. (2030 mm) Without roof rails 74.6 in. (1895 mm) Overall height With roof rails 77.0 in. (1955 mm) Wheelbase 122.0 in. (3100 mm) Front tread 67.9 in.
Page 601 6-1. Specifications Weight Vehicle capacity Driving Model code Engine weight system (Trailer weight + cargo) (Occupants+luggage) USK60L-GKTSKA 1310 lb. (590 kg) 7400 lb. (3357 kg) 1330 lb. (600 kg) USK60L-GKTLKA 7300 lb. (3311 kg) 5.7L V8 1315 lb. (595 kg) USK60L-GKTZKA 7200 lb.
Page 602 Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 603 6-1. Specifications Engine Model 3UR-FE and 3UR-FBE Type 8-cylinder V-type, 4-cycle, gasoline 3.70  4.02 in. (94.0  102.0 mm) Bore and stroke Displacement 345.6 cu.in. (5663 cm Valve clearance Automatic adjustment (engine cold) Drive belt tension Automatic adjustment Fuel Engine Gasoline engine Flex-fuel engine...
Page 604 ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toy- ota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC GF-5 multigrade engine oil...
Page 605 13.1 qt. (12.4 L, 10.9 Imp.qt.) Capacity Vehicles with towing package 14.1 qt. (13.3 L, 11.7 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 606 Oil type and viscosity LT 75W-85 GL-5 or equivalent : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please con-...
Page 607 NOTICE ■ Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmis- sion of your vehicle.
Page 608 6-1. Specifications Brakes Pedal clearance 4.1 in. (104 mm) Min. 0.04  0.24 in. (1  6 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) Parking brake pedal travel 6 —...
Page 609 6-1. Specifications Tires and wheels Type A P275/65R18 114T, Tire size P255/70R18 112T (spare tire) Front tires: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear tires: (Recommended cold tire 33 psi (230 kPa, 2.3 kgf/cm or bar) inflation pressure) Spare tire: 33 psi (230 kPa, 2.3 kgf/cm...
Page 610 6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights 9005 (high beam) Headlights — (low beam) Front fog lights 9145 Front side marker lights Front turn signal/parking 4157NAK 27/8 lights Exterior Rear turn signal lights — Stop/tail and rear side 7443 21/5 marker lights...
Page 611: Fuel Information
6-1. Specifications Fuel information Gasoline engine Your vehicle must use only unleaded gasoline. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A.
Page 612 6-1. Specifications ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ If your engine knocks ● Consult your Toyota dealer.
Page 613 (85% ethanol) 15% ethanol). ● If you use gasohol in your Toyota, be sure that it has an octane rating no lower than 87. ● Toyota does not recommend the use of gasoline containing methanol.
Page 614 Toyota does not recommend gasoline containing MMT Some gasoline contains octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected.
Page 615 6-1. Specifications NOTICE ■ When use of non-specified fuels (Flex-fuel engine) The use of non-specified fuels will have a negative impact on starting and driving performance, and will cause damage to the fuel system components. Therefore, do not add fuels such as the following. •...
Page 616: Tire Information
6-1. Specifications Tire information Typical tire symbols Tire size (P. 618) DOT and Tire Identification Number (TIN) (P. 617) Location of treadwear indicators (P. 504) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 617 6-1. Specifications Radial tires or bias-ply tires A radial tire has RADIAL on the sidewall. A tire not marked RADIAL is a bias-ply tire. Summer tire or all season tire (P. 507) An all season tire has M+S on the sidewall. A tire not marked M+S is a summer tire.
Page 618 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 619 U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades.
Page 620 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 621 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 622 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 623 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 624 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on Intended outboard the other sidewall of the tire, or sidewall...
Page 625 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 626 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indica- designed to give a visual indication of the...
Page 627: 6-2. Customization
Programming these preferences requires specialized equipment and may be performed by an autho- rized Toyota dealership. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customized Item Function...
Page 628 6-2. Customization Customized Item Function Default setting setting Wireless Push twice remote con- Power back door oper- Push and hold trol ation One short  P. 31) push Switch operation Push and hold One short push Wireless remote control linked operation Operation signal vol- Power back Operation when door...
Page 629 6-2. Customization Customized Item Function Default setting setting Driver’s door unlocked in All doors Door lock one step, all Unlocking using a key unlocked in (P. 35) doors one step unlocked in two steps Open only Power Door key linked opera- windows Open and close Close only...
Page 630 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time elapsed before 15 seconds lights turn off 30 seconds Illumination Operation after the  P. 404) engine is off Operation when the doors are unlocked Seat Belt Vehicle speed linked Reminder seat belt reminder Buzzer...
Page 631: Items To Initialize
6-2. Customization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or changing Power back door the battery.
Page 632 6-2. Customization...
Page 633: For Owners
For owners Reporting safety defects for U.S. owners ....634 Seat belt instructions for Canadian owners (in French) ..... 635 SRS airbag instructions for Canadian owners (in French) ..... 638...
Page 634: Reporting Safety Defects For U.s. Owners
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 635: Seat Belt Instructions For Canadian Owners (In French)
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.
Page 638: Srs Airbag Instructions For Canadian Owners (In French)
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
Page 647: Index
Index Abbreviation list ..... 648 Alphabetical index....650 What to do if......660 For vehicles with Entune Audio Plus or Entune Premium Audio, refer to the “NAVIGATION SYSTEM OWNER’S MANUAL” for information regarding the multimedia system. Multimedia system types: P. 318...
Page 648: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Two Wheel Drive Four Wheel Drive Anti-Lock Brake System Accessory AI-SHIFT Artificial Intelligence shifting Automatic Locking Retractor A-TRAC Active Traction Control AUTO LSD Automatic Limited Slip Differential Adaptive Variable Suspension System Blind Spot Monitor Child Restraint System Electronic Control Unit Event Data Recorder...
Page 649 Abbreviation list ABBREVIATIONS MEANING Power Supplemental Restraint System Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Treadwear indicators Trailer Weight Rating Vehicle Identification Number Vehicle Stability Control...
Page 650: Alphabetical Index
Alphabetical index Alphabetical index A/C........302, 311 Assist grips ......453 AAC disc ........336 A-TRAC ........255 ABS ...........255 Audio input....... 324 Active traction control.....255 Audio system Adaptive variable suspension A/V input port system ........247 Antenna......... 335 Air conditioning filter....518 Audio input ......324 Audio visual input Air conditioning system Air conditioning filter....518...
Page 651 Alphabetical index Battery Installing CRS with top Checking ......499 tether straps......140 If the vehicle has discharged Child safety battery ........ 589 Airbag precautions ....118 Preparing and checking Battery precautions ..500, 591 before winter ...... 275 Child restraint system....128 Blind Spot Monitor ....236 Child-protectors.......37 ®...
Page 652 Alphabetical index Cruise control Electronically modulated air Cruise control ......200 suspension ......242 Dynamic laser cruise Emergency flashers control .........204 Switch ........548 Cup holders ......424 Emergency, in case of Curtain shield airbags .....111 If the engine will not start ..585 Customizable features.....627 If the shift lever cannot be shifted from P .....
Page 653 Alphabetical index Engine coolant Front turn signal lights Capacity ....... 605 Replacing light bulbs .....535 Checking ......494 Wattage.........610 Preparing and checking Fuel before winter ...... 275 Capacity ........603 Engine coolant temperature Fuel gauge ......166 gauge ........166 Fuel pump shut off system ..556 Engine immobilizer system..
Page 654 Alphabetical index Hooks LATCH system ......134 Cargo net ......457 License plate lights Shopping bag ......458 Replacing light bulbs..... 535 Horn...........165 Wattage......... 610 Light bulbs Replacing ......535 I/M test........483 Wattage......... 610 Identification Lights Engine ........602 Door courtesy lights ....404 Vehicle ........602 Emergency flasher switch ..548 Ignition switch......156...
Page 655 Alphabetical index Mirrors Parking assist......218 Conversation mirror....438 Parking brake ......164 Inside rear view mirror.... 81 Parking lights Side mirror heaters....315 Replacing light bulbs .....535 Side mirrors ......84 Switch........185 Vanity mirrors ....... 432 Wattage.........610 Moon roof........96 Pen holder ........417 MP3 disc........
Page 656 Alphabetical index Radiator ........496 Seat belts Radio .........334 Adjusting the seat belt.....69 Rear air conditioning ALR .........74 system ........311 Automatic Locking Rear console box .....419 Retractor.......74 Rear seat Child restraint system Adjustment ......51 installation......132 Folding down second Cleaning and maintaining seatback .......55 the seat belts ......
Page 657 Alphabetical index Service reminder Stuck indicators ......171 If your vehicle becomes Shift lever stuck ........595 Automatic Sun visors.........431 transmission....... 159 Sunshade........451 If the shift lever cannot Switch be shifted from P....587 BSM main switch....236 Shift lock system..... 587 Emergency flasher switch ..548 Shopping bag hooks....
Page 658 Alphabetical index Tire information Valet key ........30 Glossary ........621 Vanity lights Size ........618 Vanity lights......432 Tire identification number..617 Wattage......... 610 Uniform tire quality Vanity mirrors ......432 grading........619 Vehicle data recordings ....24 Tires Vehicle identification Chains ........276 number ........602 Checking .......504 Vehicle stability control ..
Page 659 Alphabetical index Warning messages ....568 Washer Checking ......502 Preparing and checking before winter ...... 275 Switch......193, 197 Washing and waxing....472 Weight Cargo capacity ..... 268 Load limits ......273 Towing capacity....601 Trailer Weight Rating..284, 601 TWR ......
Page 660: What To Do If
What to do if... What to do if... A tire punctures If you have a flat tire P. 574 P. 585 If the engine will not start The engine does not start P. 104 Engine immobilizer system P. 589 If the vehicle battery is discharged If the shift lever cannot be shifted The shift lever cannot be P.
Page 661 What to do if... The warning light or indicator If a warning light turns on P. 557 light comes on ■ Instrument cluster Vehicles with multi-information display Vehicles without multi-information display ■ Center panel...
Page 662: Warning Lights
What to do if... ■Warning lights Brake system warning Low washer fluid light warning light P. 561 Power steering warning P. 557 light P. 558 Charging system warning Master warning light light P. 557 P. 562 Malfunction indicator Slip indicator lamp P.
Page 663 Memo...
Page 664: Fuel Filler Door P
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 488 P. 100 Hood lock release lever Tire inflation pressure P. 488 P. 609 Fuel tank capacity 26.4 gal. (100.0 L, 22.0 lmp.gal.) (Reference) Fuel type P. 603 Cold tire inflation P.

This manual is also suitable for:

2014 sequoia

Toyota 2015 Sequoia Owner's Manual

1 Before Driving

1-1. Key Information

1-2. Opening, Closing and Locking the Doors

Adjustable Components (Seats, Mirrors, Steering Wheel)

Opening and Closing the Windows and Moon Roof

Refueling Opening the Fuel Tank Cap

1-6. Theft Deterrent System

1-7. Safety Information

2 When Driving

2-1. Driving Procedures

Instrument Cluster Gauges and Meters

2-4. Using Other Driving Systems

2-5. Driving Information

3 Interior Features

3-1. Using the Air Conditioning System and Defogger

3-2. Using the Multimedia System

3-3. Using the Interior Lights

3-4. Using the Storage Features

3-5. Other Interior Features

4 Maintenance and Care

4-2. Maintenance

4-3. Do-It-Yourself Maintenance

5 When Trouble Arises

5-1. Essential Information

Steps to Take in an Emergency if a Warning Light Turns on or a Warning Buzzer Sounds

Vehicle Specifications

Specifications Maintenance Data (Fuel, Oil Level, Etc.)

6-2. Customization

For Owners

Index

Abbreviation List

Alphabetical Index

What to Do if

Quick Links

Related Manuals for Toyota 2015 Sequoia

Summary of Contents for Toyota 2015 Sequoia