Table of Contents
Advertisement
Automatic door locking and unlocking systems
The following functions can be set or canceled:
For instructions on customizing, refer to P. 516.
Speed linked door locking function
Shift position linked door locking
function
Shift position linked door unlocking
function
Driver's door linked door unlocking
function
Setting and canceling the functions
■
To switch between setting and canceling, follow the procedure
below:
Close all the doors and turn the engine switch to the "ON" posi-
1
tion. (Perform step 2 within 20 seconds.)
Shift the shift lever to P or N,
2
and press and hold the
driver's
or
(
mately 5 seconds and then
release.
The shift lever and switch posi-
tions
corresponding
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
SEQUOIA_OM_USA_OM0C013U_19MY
3-2. Opening, closing and locking the doors
Function
door
lock
switch
)
for
approxi-
to
the
Operation
All doors are automatically locked
when vehicle speed is approxi-
mately 12 mph (20 km/h) or higher.
All doors are automatically locked
when shifting the shift lever to posi-
tion other than P.
All doors are automatically unlocked
when shifting the shift lever to P.
All doors are automatically unlocked
when driver's door is opened within
10 seconds after turning the engine
switch to "ACC" or "LOCK".
107
3
Advertisement
Table of Contents
