Table of Contents
Advertisement
Programming the HomeLink
■
Steps
1
the indicator light will stop flashing and programming will not be able to be
completed.
Press and release the HomeLink
1
and check that the HomeLink
Point
2
transmitter for the device at
the rear view mirror, 1 to 3 in.
(25 to 75 mm) from the
HomeLink
Keep the HomeLink
light in view while programming.
Program a device.
3
Programming a device other than an entry gate (for U.S.A.
owners)
Press and hold the remote control transmitter button until the
HomeLink
rapidly flashing green (rolling code) or continuously lit green
(fixed code), then release the button.
Programming an entry gate (for U.S.A. owners)/Programming
a device in the Canadian market
Press and release the remote control transmitter button at 2 sec-
ond intervals, repeatedly, until the HomeLink
changes from slowly flashing orange to rapidly flashing green
(rolling code) or continuously lit green (fixed code).
SEQUOIA_OM_USA_OM0C013U_19MY
®
through
must be performed within 60 seconds, otherwise
3
the
remote
control
®
buttons.
®
indicator
®
indicator light changes from slowly flashing orange to
5-4. Other interior features
®
button you want to program
®
indicator light flashes orange.
®
365
5
indicator light
Advertisement
Table of Contents
