Table of Contents
Advertisement
Press and hold the desired
3
HomeLink
vehicle) for 2 seconds and
release
sequence
release) up to 3 times to
complete programming.
If the garage door opener
motor operates when the
HomeLink
pressed, the garage door
opener motor recognizes the
HomeLink
Enabling 2-way communication with a garage door (only avail-
■
able for compatible devices)
When enabled, 2-way communication allows you to check the sta-
tus of the opening and closing of a garage door through indicators
in your vehicle.
2-way communication is only available if the garage door opener
motor used is a compatible device. (To check device compatibility,
refer to www.HomeLink.com.)
Within 5 seconds after programming the garage door opener has
1
been completed, if the garage door opener motor is trained to
HomeLink
idly green and the light on the garage door opener motor will
blink twice, indicating that 2-way communication is enabled.
If the indicators do not flash, perform
presses of the HomeLink
completed.
SEQUOIA_OM_USA_OM0C013U_19MY
®
button (inside the
it.
Repeat
this
(press/hold/
®
button
is
®
signal.
®
, both garage door operation indicators will flash rap-
®
button after programming has been
5-4. Other interior features
and
within the first 10
2
3
367
5
Advertisement
Table of Contents
