Table of Contents
Advertisement
Unit Installation
Rack Mounting the NetVanta 1531/1531P/1534/1544 Using the Dual Mounting Tray
Step
1
Install the mounting tray (P/N 1700508F1) in a stationary 19-inch equipment rack using the
screws provided.
2
To allow proper grounding, scrape the paint from the rack around the mounting holes where the
tray will be positioned.
3
Position two NetVanta units side by side on the mounting tray lining up the holes in the front of the
NetVantas with the holes in the tabs on the front of the tray (see
4
Insert the provided screws through the tabs into the NetVanta units securing them with a
screwdriver.
5
Apply power to the units (refer to
The NetVanta 1531/1531P/1534/1544 Series units have a Kensington lock slot that accepts
a lock and cable security device (see
Kensington lock for installation instructions.
32
Action
Supplying Power to the Unit on page
Figure
15). Consult the manual shipped with your
Figure 16. Dual Mounting Tray
Copyright © 2019 ADTRAN, Inc.
NetVanta 1531/1534/1544 Series
Figure
16).
37).
61702590G1-34H
Advertisement
Table of Contents
