Table of Contents
Advertisement
Physical Descriptions
CONSOLE Interface
The CONSOLE interface is an EIA-232 serial port (DCE) that provides local management and
configuration (via a DB-9 female connector). Refer to
Connection directly to an external modem requires a cross-over cable.
RPS
The rear panel has a power input to a +12 VDC RPS. The RPS LED, located on the front panel of the
unit, indicates when the unit is being powered from the RPS.
Power Connection
The rear panel has a power input to the AC universal power supply. Please refer to
the Unit on page 37
NetVanta 1534P Front Panel Design
The NetVanta 1534P front panel is shown below.
Appendix A on page 47
shows the connector pinouts.
STAT
RPS
EPS
LINK/ACT
PoE
VCID
NetVanta 1534P
Front Panel Features
Status LED
The STAT LED is located on the left side of the unit and indicates the unit's status.
Redundant Power Supply LED
The RPS LED is located on the left side of the unit and indicates when the unit is receiving power
from the RPS.
Extended Power Supply LED
The EPS LED is located on the left side of the unit and indicates when the unit is receiving power from
the EPS.
Link/Activity LED
The LINK/ACT LED is located on the left side of the unit and indicates that the port LEDs are
displaying link/activity status.
Power over Ethernet LED
The PoE LED is located on the left side of the unit and indicates that the port LEDs are displaying PoE
status.
VCID LED (Future Release)
The VCID LED is located on the left side of the unit and indicates that the port LEDs are displaying
VCID.
16
for connection details.
Table 1 on page 25
1
2
3
4
5
6
Figure 7. NetVanta 1534P Front Panel Layout
Copyright © 2019 ADTRAN, Inc.
NetVanta 1531/1534/1544 Series
Table A-1 on page 47
describes all of the LEDs, and
7
8
9
10
11
12
13
14
15
16
17
18
for pinouts.
Supplying Power to
19
20
21
22
23
24
25
26
27
1G
61702590G1-34H
28
2.5G
Advertisement
Table of Contents
