Page 2
To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.
Page 5
Advance notification and the opportunity to maintain uninterrupted service are given. 4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. The telephone company may require this equipment to be disconnected from the network until the problem is corrected or it is certain the equipment is not malfunctioning.
NetVanta 1000/1000R Series Hardware Installation Guide Warranty ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found in the Support section of the ADTRAN website at http://www.adtran.com.
Page 9
ADTRAN website provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available in the Support section of the ADTRAN website at http:// www.adtran.com.
This hardware installation guide lists the NetVanta 1000 and 1000R Series units’ specifications, describes the physical characteristics of the units, introduces basic functionality, and provides installation instructions. All NetVanta 1000 and 1000R Series units run the ADTRAN Operating System (AOS) and are managed through an EIA-232 port (DB-9) located on the rear panel.
The NetVanta 1000 and 1000R Series Power over Ethernet (PWR) devices provide the same basic functionality as the NetVanta 1000 Series products. Power over Ethernet provides the ability to detect attached powered devices (PD) and deliver 48 VDC to the PD via existing CAT5 cabling. The PWR devices are fully compliant with the IEEE 802.3af power over Ethernet standard.
If the equipment has been damaged in transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to Repair and Return on page 8). Contents of ADTRAN NetVanta 1000 and NetVanta 1000R Series Shipments The NetVanta 1000 and 1000R Series units ship with the following items: •...
EIA 530 interface. This module supports rates up to a maximum of 10 Mbps. An additional V.35 (ADTRAN P/N 1200873L1), X.21 (ADTRAN P/N 1200874L1), or EIA 530 (ADTRAN P/N 1200883L1) cable is required (refer to Caution, below). See Table A-12 on page 55 for the serial connector pinouts, and Table A-13 on page 56 for the DBU connector pinouts.
Installing the NetVanta VPN Accelerator Card (P/N 1202368L1) on page 48 For information on configuring a specific application, refer to the quick configuration documents provided on your ADTRAN OS System Documentation CD or the Command Line Reference Guide (also included on your CD).
Page 49
Your NetVanta is now ready to be configured and connected to the network. For more information on configuration for a specific application, refer to the quick configuration documents provided on your ADTRAN OS System Documentation CD. For details on the command line interface, refer to the Command Reference Guide (also included on your CD).