Led Behaviors; Table 2. Front Panel Led Behaviors - ADTRAN NetVanta 1531 Series Hardware Installation Manual

NetVanta 1131 RPS/EPS
Rear Panel Interfaces
Power Connection
The NetVanta 1131 has a power input (labeled POWER) to the AC universal power supply. Refer to
Powering the NetVanta 1131 and the NetVanta Switch on page 46
Redundant Power Connections
The rear panel contains three RPS receptacles labeled RPS1, RPS2, and RPS3 that can be connected
to NetVanta switches using the NetVanta 1131 RPS cable P/N 1700532F1 (purchased separately).
Extended Power Connection
The rear panel contains one EPS receptacle labeled EPS that can be connected to NetVanta switches
using the NetVanta 1131 EPS cable P/N 1700533F1 (purchased separately).

LED Behaviors

The following table describes LED activity for the NetVanta 1131 RPS/EPS.
LED
Power Off
Green (solid)
RPS ALM Off
Red (solid)
EPS ALM Off
Red (solid)
FAN ALM Off
Red (solid)
RPS CONN (1 - 3) Off
Green (solid)
RPS STAT (1 - 3) Off
Amber (solid)
Amber (flashing)
EPS CONN Off
Green (solid)
40

Table 2. Front Panel LED Behaviors

Color
The unit is not receiving power.
The unit is receiving power.
The RPS is functioning properly.
The RPS has failed.
The EPS is functioning properly.
The EPS has failed.
The fans are functioning properly and the system temperature
is acceptable.
The fans have failed.
There is no connection to the switch.
There is a valid connection to the switch.
Power is not being provided to the associated port.
Power is being provided to the associated port.
A fault condition exists on the associated port.
There is no connection to the switch.
There is a valid connection to the switch.
Copyright © 2019 ADTRAN, Inc.
NetVanta 1531/1534/1544 Series
for connection details.
Indication
61702590G1-34H