Introduction - D-Link AirPlus XtremeG DWL-G810 Manual

2. Introduction

The D-Link AirPlus XtremeG DWL-G810 Ethernet-to-Wireless Bridge is a
device that can be implemented in a variety of ways to provide wireless
access by converting an Ethernet connection. For devices with a built-in
Ethernet port, the DWL-G810 provides a cost effective way to gain wireless
connectivity, virtually transforming wired devices into wireless units! Connect
any Ethernet-enabled device to 802.11g wireless network and legacy
802.11g wireless network using the DWL-G810.
Typical applications include connecting a printer to a wireless network and
connecting Ethernet-enabled devices such as game consoles or set top
boxes to a Wireless Local Area Network (WLAN). Simply connect the DWL-
G810 to the Ethernet (RJ-45) port of a network device, such as a network
storage device, Internet camera, network printer, network scanner, or other
similar device. Using the DWL-G810 allows the flexibility of placing network
devices in remote locations while maintaining a high-speed connection.
You can use the convenient Setup Wizard for the easy installation of your
DWL-G810. Whether you are using it in Ad-Hoc mode or Infrastructure mode,
you can begin with the Setup Wizard. Please refer to the Quick Installation
Guide that is included with your purchase for instructions on how to use the
Setup Wizard.
This manual provides a quick introduction to wireless technology and its
application as it relates to networking. Please take a moment to read through
this manual if you need to get acquainted with wireless technology.
4