System Overview; Hardware Introduction - D-Link DLM-3500 Quick Installation Manual

1.3 System Overview

1.3.1 Hardware Introduction

Front Panel
LED's:
1. WAN1/WAN2/WAN3/WAN4: OFF indicates the line is not connected, and ON indicates the line is
connected.
2. LAN: OFF indicates the line is not connected, and ON indicates the line is connected.
3. Power: ON indicates that power is on and OFF indicates that power is off.
Rear Panel
DC-IN: The power cord attaches here.
LAN: The LAN port is connected to internal private network for users access Internet. Default LAN port IP is
192.168.0.1. By connecting to LAN port, user could access the web management interface to configure DLM-3500.
WAN1/WAN2/WAN3/WAN4: The four WAN ports are connected to a network which is not managed by the
DLM-3500 system, and this port can be used to connect the ATU-Router of ADSL, the port of Cable Modem, or the
Switch or Hub on the LAN of a company. Default WAN1/WAN2/WAN3/WAN4 port IPs are 192.168.1.1, 192.168.2.1,
192.168.3.1 and 192.168.4.1 respectively. Example in next chapter leads you to configure WAN ports to correspond
to your network environment.
Console Port: The system can be configured via HyperTerminal. The terminal's configuration must be 9600bps, 8,
N, 1, flow control - none.
DLM-3500 Quick Installation Guide
2