Troubleshooting - D-Link AirPlus XtremeG DWL-G810 Manual

802.11g high-speed ethernet-to-wireless bridge
Hide thumbs Also See for AirPlus XtremeG DWL-G810:
Table of Contents

Advertisement

6.

Troubleshooting

This section provides solutions to situations that can occur during the
installation and operation of the DWL-G810 Ethernet-to-Wireless Bridge.
Read the following descriptions if you are having problems.
1. How do I assign a Static IP Address in Windows XP/2000?
Please note that Residential
Gateways/Broadband Routers
will automatically assign IP
Addresses to the computers on
the network, using DHCP
(Dynamic Host Configuration
Protocol) technology. If you are
using a DHCP-capable
Gateway/Router you will not
need to assign Static IP
Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to
assign a Static IP Address, please follow these instructions:
Go to Start
Double-click on Control Panel
Double-click on Network
Connections
18

Advertisement

Table of Contents
loading

Table of Contents