Epson EB-810E User Manual page 142

Wireless Network Projection
f Select the security settings to match your network settings.
g
Do one of the following according to the security you selected.
• WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press [Enter],
and enter a passphrase from 8 to 63 characters long. Then go to step
16.
• WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press
[Enter].
h Select the protocol for authentication as the EAP Type setting.
i
To import your certificate, select the certificate type and press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for all EAP types
You can also register the digital certificates using your Web
browser. However, be sure to register just once or the certificate
may not install correctly.
a
Select Save and press [Enter].
j
k
Follow the on-screen instructions to connect a USB storage device to
the projector's USB-A port.
l Press [Enter] to display the certificate list.
m Select the certificate to import using the displayed list.
A message is displayed prompting you to enter the password for the
certificate.
n Enter a password and press [Enter].
The certificate is imported and a completion message appears.
o
Select your EAP settings as necessary.
• User name lets you enter a user name using up to 64 alphanumeric
characters. When importing a client certificate, the name the
certificate was issued to is automatically set.
• Password lets you enter a password using up to 64 alphanumeric
characters for authentication when using the PEAP or EAP-FAST
type.
• Verify Server Certificate lets you select whether or not to verify the
server certificate when a CA certificate has been set.
• RADIUS Server Name lets you enter the server name to be verified.
p When you finish making settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
142