Wireless Sensors; Pairing Your Wireless Sensors; Fitness Settings; Marking Laps By Distance - Garmin GRN-010-02088-01 Owner's Manual

Wireless Sensors

Your device can be used with wireless ANT+ or Bluetooth sensors. For more information about compatibility
and purchasing optional sensors, go to buy.garmin.com.

Pairing Your Wireless Sensors

Before you can pair, you must put on the heart rate monitor or install the sensor.
Pairing is the connecting of wireless sensors using ANT+ or Bluetooth technology, for example, connecting a
heart rate monitor with your device.
1 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other sensors while pairing.
2 Select Setup > Sensors.
3 Select your sensor type.
4 Select Search For New.
When the sensor is paired with your device, the sensor status changes from Searching to Connected.

Fitness Settings

Select Setup > Fitness.
Auto Lap: Sets the device to automatically mark the lap at a specific distance.
User: Sets your user profile information. The device uses this information to calculate accurate training data in
Garmin Connect.
HR Zones: Sets the five heart rate zones and your maximum heart rate for fitness activities.

Marking Laps by Distance

You can use Auto Lap ® to automatically mark the lap at a specific distance. This feature is helpful for comparing
your performance over different parts of an activity.
1 Select Setup > Fitness > Auto Lap.
2 Enter a value, and select Done.

Marine Settings

Select Setup > Marine.
Marine Chart Mode: Sets the type of chart the device uses when displaying marine data. Nautical displays
various map features in different colors so the marine POIs are more readable and so the map reflects the
drawing scheme of paper charts. Fishing (requires marine maps) displays a detailed view of bottom contours
and depth soundings and simplifies map presentation for optimal use while fishing.
Appearance: Sets the appearance of marine navigation aids on the map.
Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are
off course by a specified distance, and when you enter water of a specific depth.
Marine Speed Filter: Averages the speed of your vessel over a short period of time for smoother speed values.

Setting Up Marine Alarms

1 Select Setup > Marine > Marine Alarm Setup.
2 Select an alarm type.
3 Enter a distance, and select Done.
Customizing the Device 37