Finding a Location Near a Waypoint
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Find Near Here.
4 Select a category.
The list displays locations near the selected waypoint.
Setting a Waypoint Proximity Alarm
You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range
of a particular location.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Set Proximity.
4 Enter the radius.
When you enter an area with a proximity alarm, the device sounds a tone.
Adding a Waypoint to a Route
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Add to Route.
4 Select a route.
Repositioning a Waypoint to Your Current Location
You can change the position of a waypoint. For example, if you move your vehicle, you can change the location
to your current position.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Reposition Here.
The waypoint location changes to your current location.
Routes
A route is a sequence of waypoints or locations that leads you to your final destination. Routes are saved as
GPX files on the device.
Creating a Route
1 Select Route Planner > Create Route > Select First Point.
2 Select a category.
3 Select the first point in the route.
4 Select Use.
5 Select Select Next Point to add additional points to the route.
6 Select QUIT to save the route.
Navigating a Saved Route
1 Select FIND > Routes.
2 Select a route.
3 Select Go.
By default, your route appears as a straight, colored line on the map.
Navigation
19