Getting Started; Installation - Printek PrintMaster 862 Operator's Manual

GETTING STARTED

This chapter will use the fewest possible steps to get the first time user up and running quickly. You will
be guided through the following steps:
•
Finding a suitable location and installing the printer
•
Setting up a host interface if necessary
•
Installing the ribbon cartridge
•
Loading paper
•
Performing a printer self-test

Installation

Before installation, a suitable site must be chosen. Suitable sites include offices, computer rooms, and
most factory environments. Printek printers have been designed to be rugged, heavy-duty printers. As
such, they will handle most harsh environments, but should not be placed in direct sunlight or in areas that
will exceed the rated temperature, humidity, or power requirements. For details, refer to
"SPECIFICATIONS" on page 63.
Once a site has been selected, the printer should be placed on a countertop, desk or Printek Printstand.
The printstand should be located in an area large enough to provide easy access to both the front of the
printer and the rear for accessing printed output. Unpack the printer as described in the "PrintMaster
860/862 Unpacking Instructions" and place the printer on the printstand or counter top.
Caution: Before connecting power, make sure that all shipping materials have been removed. These
materials include an internal brace that secures the print head carriage (open front lid to access).
Now connect the computer cable(s) to the appropriate interface. Next, connect the power cord supplied
with the printer to the printer and an appropriate power outlet. The pictures below show the location of the
interface connectors on the rear panel of the printer.
PARALLEL I/O
SERIAL I/O
Standard Interface Connectors on rear of printer
3