Printek PrintMaster 862 Operator's Manual page 38

P R I N T E R C O N F I G U R A T I O N
whether the data for the current page is still in the printer's memory. Refer to the following Reprint Page
Size option for more information regarding how much data may be retained.
When Break Page is selected, the printer will stop printing and go off line as soon as a paper out or
paper jam condition is detected. After a new box of forms is loaded, printing will resume where it left off.
The Break Page setting is appropriate when you know a page is too large to reprint (exceeds available
buffer size, e.g. contains large graphic images). This will suppress the error message Cannot Reprint
before printing continues.
Character to Ignore
Possible Values: 0, ... 255*
This allows a single 8-bit character to be discarded as it is received. This is useful when the host
application is sending an unwanted control character, for example. Values are in decimal, with printable
characters displayed to the left of the decimal value.
To use this feature:
1) Press the UP/DOWN ARROW keys to select the desired character decimal value. Printable characters
will appear to the left of the number.
2) Press the ITEM button to display Ignore Character On/Off, then the UP/DOWN ARROW keys
to turn the feature On or Off.
This feature should not be turned on unless needed.
Top of Barcode
Possible Values: On, Off*
In Genicom 3840 or 3410 Emulation, this feature repositions the print head at the top of a barcode after the
barcode has printed. When disabled, printing continues from the bottom of the barcode.
This feature has no meaning in other emulations.
Top of Oversized
Possible Values: On, Off*
In Genicom 3840 or 3410 Emulation, this feature repositions the print head at the top of oversized
characters after the oversized characters have printed. When disabled, printing continues from the bottom
of the oversized characters.
This feature has no meaning in other emulations.
32
Char. To Ignore:
255
Top of Barcode
Off
Top of Oversized
Off