Options Menu - Printek PrintMaster 862 Operator's Manual

P R I N T E R C O N F I G U R A T I O N
Perform Host Form Feed
at Top-of-Form
No*, Yes
Possible Values:
This item selects whether Form Feeds (FF) will be performed when received from the host computer if the
paper is already positioned at the top of form (TOF). Setting this item to
Characters
Possible Values: Control*, Printable
This item selects whether certain control character symbols will be printed or be treated as control
characters. The effect of this is dependent upon the emulation selected above.
Minimum Buffer
No*, Yes
Possible Values:
This item selects whether the minimum I/O buffer size should be used. Setting this item to
the printer to make maximum use of the I/O buffer (see "
on buffer size). Setting this to
operating systems that try to keep track of which page is currently being printed by the printer.

OPTIONS MENU

OPTIONS MENU
The contains items, which do not pertain only to a specific form or specific interface, but
rather affect how the printer works under all conditions. To access the options menu, enter Setup and then
press MENU until OPTIONS MENU is displayed
OPTIONS MENU
Note that the options menu has no submenus. Therefore, press the ALIGN/ITEM button to begin displaying
the items available. The factory default values are indicated with an asterisk (*) in this manual (the asterisk
does not appear on the printer's display).
Maximum Form Allowed
Form 0 ... Form 1* ... Form 9
Possible Values:
This item sets the last form number to be displayed for operator selection with the UNLOAD/CHANGE button
or while in the Forms Menu. This allows the operator to see only the forms that are in use rather than
having to sort through several unused forms.
30
Host FF at TOF
Characters
Minimum Buffer
Yes
may decrease performance, but is useful when using the printer with
Max Form Allowed
No
No
will help prevent blank pages.
Control
No
" on page 31 for more information
Paper Out Fault
Form 1
No will allow