Accessing The Web Config Utility; Changing A Usb Connection To A Wi-Fi Connection - Epson SureColor P6570 Series User Manual

Accessing the Web Config Utility

You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: You can also access the Web Config utility from the product information area in the Epson Smart
Panel app. For more information on the Web Config utility, see the online Administrator's Guide.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Note: The administrator password is required to access the full capabilities of the Web Config utility.
The default password is the product's serial number. Check the label on your product to locate the
serial number.
Parent topic:
Related tasks
Printing a Network Status Sheet
Setting a Password and Locking the Control Panel

Changing a USB Connection to a Wi-Fi Connection

If you have already connected your product to your computer using a USB connection, you can change
to a Wi-Fi connection.
1. Disconnect the USB cable from your product.
2. Uninstall your product software.
3. Download and install your product software from the Epson website using the instructions on the
Start Here sheet.
Parent topic:
Changing or Updating Network Connections
Changing or Updating Network Connections
56