Printing Using Hp-Gl/2 And Hp Rtl Emulation; Series); Switching Between Roll 1 And Roll 2 According To The Paper Type - Epson SureColor SC-P8500DM Series User Manual

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
B
Select Line Drawing in Print Quality.
C
Check other settings, and then start printing.
Printing Using HP-GL/2 and HP
RTL Emulation
*
The printer can emulate HP-GL/2 (compatible with
HP Designjet 750C) and HP RTL.
If you want to print using HP-GL/2 or HP RTL output
from your software, set the output device as follows
according to your model.
HP Designjet 750C C3196A
* Not all functions are supported. If you will use an
untested application, test its output in advance.
For a list of applications that have been tested, visit
the Epson website at https://www.epson.com.
c
Important:
The printer may not perform as expected if the
size of the data to be printed is extremely large.
Keep the following points in mind when printing
using HP-GL/2 or HP RTL emulation.
Various Printing Methods
❏ HP-GL/2 Settings
When printing using HP-GL/2 and HP RTL
emulation, use Printer Settings - HP-GL/2
Unique Settings from the printer's General
Settings.
Automatically Switch Roll
Paper for Printing (Except
for the SC-P6500E Series/
SC-T3700E Series)
You can automatically switch to the appropriate roll
paper for a print job. The following outlines the
conditions and priorities for switching roll paper.
P Item
r
i
o
r
i
t
y
1 Paper Type
2 Paper Width
3 Paper Length
Switching Between Roll 1 and
Roll 2 According to the Paper
Type
If you frequently use the printer as described in the
following example, you can make the settings below to
automatically switch between Roll 1 and Roll 2 to
print according to the paper type.
91
Content
Switch to roll paper that has the
same paper type as the print
job.
Switch to roll paper that has the
same or a similar paper width to
the print job.
Switch to roll paper with less
paper remaining.