Epson SureColor P6570 Series User Manual page 44

Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• To move the cursor, press the left or right arrows.
• To enter numbers or symbols, select 123#.
• To change the case of letters, select
• To delete the previous character, select
• To enter a space, select Space.
6. Select OK when you finish entering your password.
7. Confirm the displayed network settings and select Start Setup to save them.
8. If you want to print a network connection report, select Print Check Report. (Otherwise, select OK.)
9. Select the home icon to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software from the Epson website.
Note: If you don't see the
password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related references
Control Panel
Related tasks
Accessing the Web Config Utility
.
.
icon, you may have selected the wrong network name or entered the
44