3
OS100E Series - Operation
Example 1:
The following is shown on the PC (terminal) screen after typing
"AMODE" and "Enter". The activation mode is not changed, but it is
reported.
AMODE
ALARM MODE SET FOR
RISING TEMP.
>
Example 2:
The following is shown on the PC (terminal) screen after typing
"AMODE 0" and "Enter". The activation mode is changed to "falling"
and reported as such.
AMODE 0
ALARM MODE SET FOR
FALLING TEMP.
>
Example 3:
The following is shown on the PC (terminal) screen after typing
"AMODE 1" and "Enter". The activation mode is changed to "rising"
and reported as such.
AMODE 1
ALARM MODE SET FOR
RISING TEMP.
>
EMS Command:
Description: - Transmit emissivity setting.
Syntax:
Parts:
Remarks:
The purpose of this command is to transmit the current emissivity setting
only. The only method of changing the emissivity setting is by opening
the OS101E/OS102E case, and adjusting the emissivity potentiometers.
Example:
The following is shown on the PC (terminal) screen after typing "EMS"
and "Enter":
EMS
E = 0.95
>
3-8
EMS CR [LF]
None. There are no parameters for this command.