To Adjust The Cutting Height With Automower Connect - Husqvarna AUTOMOWER 535 AWD Operator's Manual

2. Put the product in as far as possible and make
sure it is connected to the charging station.
The battery status can be monitored on the status bar of
the display.
Note:
If the battery is empty the product needs to
charge for a longer time period before the product is
possible to start.
4.6 To adjust the cutting height with
®
Automower Connect
The cutting height can be varied from MIN (3 cm / 1.2
in.) to MAX (7 cm / 2.8 in.).
Note:
During the first weeks after a new installation,
the cutting height must be set to MAX to avoid damaging
the loop wire. After this, the cutting height can be
lowered step by step every week until the desired cutting
height has been reached.
Settings > Cutting height .
1. Select
2. Move the horizontal bar to set the cutting height.
Save .
3. Select
28 - Operation 1427 - 006 - 25.11.2021